PROCESSOR SUPPORT
Supports Pentium 4™ and Celeron™ (mPGA) CPUs up to 3.06GHz, with FSB clock cycles @ 533MHz and 400MHz.
CHIPSET
Intel® 845GV provides support for Pentium 4™ / Celeron™ (mPGA) processor, at 533MHz / 400MHz system bus, and PC2100 DDR SDRAM memory. Intel® 845GV has two controller hubs which include 82845GV Graphics and Memory Controller Hub (GMCH) and the 82801DB I/O Controller Hub (ICH4). 82845GV controls the Integrated Intel® Extreme Graphics which gives video without the need of a graphics card, and it also controls DDR SDRAM or PC133 SDRAM. 82801DB controls the USB 2.0, Ultra ATA/100, LAN interface, 6 Channel Audio, and PCI.
HOST BUS INTERFACE
PCI Bus supports 32-bit transfers @ 33MHz via one full size PCI slot and one mini PCI slot type III
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS website.
L-2 CACHE
Integrated via CPU
DDR MEMORY
Up to 1GB of DDR SDRAM in one 184-pin DIMM socket (supports PC2700 / PC2100)
EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB / 66MB / 33MB per second via 40-pin Box header & 44-pin 2 mm Box header.
WATCHDOG TIMER
254-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
CMOS clock with 10Years of backup via lithium battery, including BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
LBC-7632-VN: Integrated in Intel® 845GV chipset via 82801DB ICH4 chip 10Mbps / 100Mbps, auto-switching
LBC-7632-VBN: Integrated in Intel® 845GV chipset via 82801DB ICH4 chip 10Mbps / 100Mbps, auto-switching and Intel® 82540EM 10Mbps / 100Mbp / 1000Mbps, auto-switching
LAN INTERFACE
10-pin 2mm header
DISPLAY CONTROLLER
LBC-7632-VN:*
CHIPSET
Graphics controller integrated in Intel® 845GV chipset via 82845GV GMCH chip with Intel® 4x AGP “Extreme Graphics”.
DISPLAY MEMORY
Up to 64MB of shared SDRAM memory
DISPLAY TYPES
CRT, Flat Panel
CRT RESOLUTIONS
Maximum resolution 1600 x 1200 @ 32bpp (UXGA, SXGA, XGA, SVGA, VGA)
CRT INTERFACE
16-pin 2mm Box header
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
FLAT PANEL INTERFACES
Two channels 24-bit LVDS via 30-pin Hirose connector
TMDS via 20-pin Hirose connector
LBC-7632-VBN:**
CHIPSET
ATI® Radeon™ 7500 (M7-CSP32)
DISPLAY MEMORY
32MB SDRAM on die
DISPLAY TYPES
CRT, Flat Panel, TV-Output
CRT RESOLUTIONS
Maximum resolution 1600 x 1200 @ 32bpp (UXGA, SXGA, XGA, SVGA, VGA)
CRT INTERFACE
16-pin 2mm Box header
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
FLAT PANEL INTERFACE
Two channels 48-bit LVDS via 30-pin Hirose connector
TMDS via 20-pin Hirose connector
TV-OUTPUT INTERFACE
6-pin Box header: NTSC, PAL NTSC-EIA (Japan)
TV-OUTPUT RESOLUTIONS
Maximum resolution 1024 x 768 (XGA, SVGA, VGA)
AUDIO CONTROLLER
CHIPSET
Intel® 82801DB I/O Controller Hub 4 (ICH4); Audio Codec '97.
AUDIO INTERFACES
Line-in, MIC, speaker out via 10-pin 2mm Box header and CD audio via 4-pin mini header
FLASH DISK SUPPORT
DISK-ON-MODULE®
Up to two modules via EIDE 40-pin and 44-pin 2mm Box header (up to 512MB per module)
HIGH SPEED MULTI I/O
CHIPSET
Winbond 83627HF
SERIAL PORTS
Three high speed RS-232C ports: COM 1, COM 3 & COM 4. One RS-232C/422/485 (jumper selectable) COM 2 via 40-pin 2mm Box header. Supported by 16C550 UART and 16KB FIFO
USB INTERFACES
Four USB 2.0 ports via two 10-pin 2mm headers
FLOPPY DISK DRIVE INTERFACE
FDD via 20-pin 2mm header; Supports 5¼inch 1.2MB / 360KB and 3½inch 2.88MB / 1.44MB / 720KB floppy disk drives (up to two floppy disk drives)
BI-DIRECTIONAL PARALLEL PORT
LPT1 via 20-pin 2mm header; Supports SPP, EPP and ECP modes
SIR INTERFACE
Infrared (IR) via 5-pin header; IrDA ver. 1.1
KEYBOARD / MOUSE INTERFACES
Keyboard/Mouse port via 6-pin Box header
POWER / ENVIRONMENTAL
POWER REQUIREMENTS: (P4-3.06 + 512M DDR)
LBC-7632-VN: +3.3V @ 1.25A, +5V @ 0.88A, +12V @ 4.56A
LBC-7632-VBN: +3.3V@ 1.48A, +5V@ 1.22A, +12V @ 4.75A
POWER INTERFACE
ATX1 via 20-pin and ATX12V via 4-pin
CPU POWER
On board PWM DC-to-DC converter auto-detects CPU core voltage.
SYSTEM MONITORING
CPU & system temperature, system voltage, and cooling fan RPM.
BOARD DIMENSIONS
203mm x 148mm (8inch x 5.75inch)
BOARD WEIGHT
0.3kg (0.66lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)