GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Supports Intel^® Pentium III™ FcPGA up to 1.26_GHz (Socket 370), Celeron™ FcPGA  and VIA Cyrix III CPU’s, with FSB clock cycles @ 133_MHz / 100_MHz / 66_MHz.

CHIPSET
The VIA^®  VT8601T North Bridge which provides support for Pentium III^TM / Celeron^TM (FcPGA) processors, a 133_MHz system bus, and PC133 SDRAM memory as well as a Trident Blade3D graphics core with integrated AGP2X support and VT82C686B “Super Southbridge” (which supports ISA bus, EIDE ATA-100, and USB functionality). Together provide PCI host interface bus support.

HOST BUS INTERFACE
ISA bus supporting 16-bit transfers @ 8.3_MHz via PICMG backplane.

FLASH BIOS
AWARD^® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.

L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.

DRAM MEMORY
Up to 512_MB of SDRAM in one 168-pin DIMM socket (supports PC133 / PC100 / PC66)

EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100_MB / 66_MB / 33_MB per second via 40-pin Box header and 44-pin 2_mm Box header

WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
Incorporated in chipset with 10_Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Realtek^® RTL8139C 10_Mbps/ 100_Mbps, auto-switching

LAN INTERFACES
Two RJ-45 connectors via SBC I/O plate

DISPLAY CONTROLLER

CHIPSET
Trident Blade3D AGP2x Graphics engine VT8601T integrated into the VIA^® VT8601T Northbridge

DISPLAY MEMORY
Up to 8_MB of shared SDRAM memory

DISPLAY TYPES
CRT Only

CRT RESOLUTIONS
1024 x 768 @ 32bpp, 1280 x 1024 @ 16bpp

CRT INTERFACE
On board DB-15 connector

FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
Maximum resolution 1280 x 1024 @ 16bpp (SXGA, XGA, SVGA, VGA)

FLAT PANEL INTERFACES (OPTIONAL)
The daughter board DB-C200 TTL has 75-pin header
The daughter board DB-C300 TMDS has 20-pin Hirose connector out to 24-pin DVI interface The daughter board DB-C400 LVDS has 20-pin Hirose connector
One daughter board can be connected to SBC-1433 via 42-pin Box header

FLASH DISK SUPPORT

COMPACT FLASH
Supports compact flash type I and II

HIGH SPEED MULTI I/O

CHIPSET
Integrated in VT82C686B “Super” Southbridge

SERIAL PORTS
One high speed RS-232C port COM 1 via on board DB-9 connector, one internal high speed RS-232C / 422 / 485 (jumper selectable) port COM 2 via 10-pin box header.

USB INTERFACE
Two USB ports version 1.1 via 10-pin 2_mm headers

AUDIO
AC’97 2.2 Compliant integrated via the VIA VT82C686B Super Southbridge. Interface includes Line-in, CD-Audio in, MIC-in, Speaker-out

SERIAL INFRARED INTERFACE
IrDA TX/RX port via 5-pin Box header

FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼_inch 1.2_MB/360_KB and 3½_inch 2.88_MB/1.44_MB/720_KB floppy disk drives (up to two floppy disk drives)

BIDIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin Box header

KEYBOARD / MOUSE INTERFACES
External PS/2 keyboard / mouse port via two-in-one mini DIN and AT keyboard port via 5-pin box header

DIGITAL I/O
8-bit, 4 digital input and 4 digital output

POWER / ENVIRONMENTAL

POWER REQUIREMENTS
+5_V @ 5_A nominal, +12_V @ 0.13_A nominal (Tested with Pentium III™ FcPGA @ 1_GHz @ 133_MHZ FSB with 512_MB SDRAM PC133)

CPU POWER
On board PWM DC-to-DC converter auto-detects CPU core voltage

SYSTEM MONITORING
CPU temperature and voltage

BOARD DIMENSIONS
185_mm x 122_mm (7.28_inch x 4.81_inch)

BOARD WEIGHT
0.26_kg (0.57_lbs)

OPERATING TEMPERATURE
0° to 60°_C (32° to 140°_F)