GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Supports Intel^® Pentium III™ FcPGA up to 1.0_GHz, Intel^® Celeron™ FcPGA, up to 1.0_GHz (via Socket 370) with FSB @ 133_MHz / 100_MHz / 66_MHz

CHIPSET
The VIA^® ProSavage^TM PL 133 combines the performance of the VT8604 “Northbridge” (which provides support for Pentium III^TM / Celeron^TM (FcPGA) processors, a 133_MHz system bus, and PC133 SDRAM memory as well as a Savage4^® graphics core with integrated AGP 4x support) and VT82C686B “Southbridge” (which supports ISA bus, EIDE ATA 100, and USB functionality). Together provide PCI host interface bus support.

HOST BUS INTERFACE
PCI Bus supports 32-bit transfers @ 33_MHz and legacy ISA bus supporting 16-bit transfers @ 8.3_MHz via PICMG backplane.

FLASH BIOS
AWARD^® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.

L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.

DRAM MEMORY
Up to 1.5_GB of SDRAM in three 168-pin DIMM sockets (supports PC133 / PC100 / PC66)

EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100_MB /66_MB / 33_MB per second via two 40-pin Box headers

WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
Incorporated in chipset with 10_Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Realtek RTL8139C 10_Mbps / 100_Mbps, auto-switching

LAN INTERFACES
One RJ-45 connector via SBC I/O plate

DISPLAY CONTROLLER

CHIPSET
VIA^® S3 Savage4™ 3D and S3 Savage 2000™ 2D engines integrated in VT8604. Supports 4x AGP.

DISPLAY MEMORY
Up to 32_MB of shared SDRAM memory

DISPLAY TYPES
CRT, Flat Panel (optional)

CRT RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
Maximum resolution 1280 x 1024 @ 16bpp (SXGA, XGA, SVGA, VGA)

CRT INTERFACE
On board DB-15 connector

FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
Maximum resolution 1280 x 1024 @ 16bpp (SXGA, XGA, SVGA, VGA)

FLAT PANEL INTERFACES (OPTIONAL)
The daughter board DB-C200 TTL has 75-pin header
The daughter board DB-C300 TMDS has 20-pin Hirose connector out to 24-pin DVI interface
The daughter board DB-C400 LVDS has 20-pin Hirose connector
One daughter board can be connected to SBC-8433C via 42-pin Box header

AUDIO CONTROLLER (OPTIONAL)

CHIPSET
VIA VT1612A, AC ‘97 digital audio controller supported by DB-A100 daughter board

AUDIO INTERFACES
Line-in, MIC, speaker out via 10-pin 2_mm header and CD audio via 4-pin header on DB-A100. DB-A100 connects to SBC-8433C via 16-pin Box header.

FLASH DISK SUPPORT

DISK-ON-CHIP^® 2000
On board single chip flash disk socket in a 32-pin DIP JEDEC with capacities up to 576_MB

DISK-ON-MODULE^®
Supports up to two modules via two EIDE 40-pin Box headers with capacities available up to 512_MB per module

HIGH SPEED MULTI I/O

CHIPSET
Integrated in VT82C686B “Super” Southbridge

SERIAL PORTS
One external DB-9 connector high speed RS-232C port COM 1 and one internal 10-pin Box header high speed RS-232C / 422 / 485 (jumper selectable) port COM 2. Supported by 16C550 UART and 16_KB FIFO

USB INTERFACES
Four USB 1.0 ports via two 10-pin Box header

SERIAL INFRARED INTERFACE (SIR)
IrDA TX / RX port via 5-pin header

FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼_inch 1.2_MB/360_KB and 3½_inch 2.88_MB/1.44_MB/720_KB floppy disk drives (up to two floppy disk drives)

BIDIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin Box header

KEYBOARD / MOUSE INTERFACES
External PS/2 keyboard / mouse port via two-in-one mini DIN and AT keyboard port via 5-pin Box header

POWER / ENVIRONMENTAL

POWER REQUIREMENTS
+5_V @ 4.2_A nominal, +/-12_V (tested with Pentium III™ FcPGA @ 800_MHz @ 133_MHz FSB and 256_MB SDRAM PC133)

BOARD DIMENSIONS
338_mm x 122_mm (13.31_inch x 4.8_inch)

BOARD WEIGHT
0.45_kg (0.99_lbs)

OPERATING TEMPERATURE
0° to 60°_C (32° to 140°_F)