PROCESSOR SUPPORT
Supports Intel® Pentium III™ FcPGA and Celeron™ FcPGA CPU’s, up to 1.0GHz (Socket 370) with FSB clock cycles @ 133MHz / 100MHz / 66MHz.
CHIPSET
The VIA® ProSavageTM PL 133 combines the performance of the VT8604 “Northbridge” (which provides support for Pentium IIITM / CeleronTM (FcPGA) processors, a 133MHz system bus, and PC133 SDRAM memory as well as a Savage4® graphics core with integrated AGP 4x support) and VT82C686B “Southbridge” (which supports ISA bus, EIDE ATA 100, and USB functionality). Together provide PCI host interface bus support.
HOST BUS INTERFACE
PCI Bus supports 32-bit transfers @ 33MHz and legacy ISA bus supporting 16-bit transfers @ 8.3MHz via PICMG backplane.
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters,
peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.
DRAM MEMORY
Up to 1.5GB of SDRAM in three 168-pin DIMM sockets (supports PC133 / PC100 / PC66)
EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB /66MB / 33MB per second via two 40-pin Box headers
WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSETS
Two Intel® 82559 10Mbps / 100Mbps, auto-switching
LAN INTERFACES
Two RJ-45 connectors via SBC I/O plate
DISPLAY CONTROLLER
CHIPSET
VIA® S3 Savage4™ 3D and S3 Savage 2000™ 2D engines integrated in VT8604. Supports 4x AGP.
DISPLAY MEMORY
Up to 32MB of shared SDRAM memory
DISPLAY TYPES
CRT, Flat Panel (optional)
CRT RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
Maximum resolution 1280 x 1024 @ 16bpp (SXGA, XGA, SVGA, VGA)
CRT INTERFACE
On board DB-15 connector
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
Maximum resolution 1280 x 1024 @ 16bpp (SXGA, XGA, SVGA, VGA)
FLAT PANEL INTERFACES (OPTIONAL)
The daughter board DB-C200 TTL has 75-pin header
The daughter board DB-C300 TMDS has 20-pin Hirose connector out to 24-pin DVI interface
The daughter board DB-C400 LVDS has 20-pin Hirose connector
One daughter board can be connected to SBC-8433 via 42-pin Box header
AUDIO CONTROLLER
CHIPSET
VIA VT1612A, AC ‘97 digital audio controller supported by DB-A100 daughter board
AUDIO INTERFACES
Line-in, MIC, speaker out via 10-pin 2mm header and CD audio via 4-pin header on DB-A100. DB-A100 connects to SBC-8433 via 16-pin 2mm header.
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000
On board single chip flash disk socket in a 32-pin DIP JEDEC with capacities up to 576MB
DISK-ON-MODULE®
Supports up to two modules via two EIDE 40-pin Box headers with capacities available up to 512MB per module
ISA64 HIGH BUS DRIVE
ISA TTL BUFFERED
64mA of high bus drive TTL buffer supporting up to 20-ISA host bus interface cards.
HIGH SPEED MULTI I/O
CHIPSET
Integrated in VT82C686B “Super” Southbridge
SERIAL PORTS
One high speed RS-232C port via 10-pin Box header COM 1 and one high speed RS-232C / 422 / 485 (jumper selectable) port via 10-pin Box header COM 2. Supported by 16C550 UART and 16KB FIFO
USB INTERFACES
Two USB 1.0 ports via 10-pin 2mm header
SERIAL INFRARED INTERFACE (SIR)
IrDA TX / RX port via 5-pin header
FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼inch 1.2MB/360KB and 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)
BIDIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin Box header
KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN and AT keyboard port via 5-pin Box header
POWER / ENVIRONMENTAL
POWER REQUIREMENTS
+5V@ 4.7A nominal, +/-12V (tested with Pentium III™ FcPGA @ 800MHz @ 133MHz FSB with 256MB SDRAM PC133)
BOARD DIMENSIONS
338mm x 122mm (13.31inch x 4.8inch)
BOARD WEIGHT
0.45kg (0.99lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)