PROCESSOR SUPPORT
Supports Intel® Pentium M™ CPU’s, up to 1.8GHz (Socket 479) with FSB clock cycles @ 400MHz .
CHIPSET
The Intel® 852GMTM coupled the execution core of the Pentium III with a Pentium 4 compatible bus interface, an improved instruction decoding/issuing front end, improved branch prediction, SSE2 support, and a much larger cache.
HOST BUS INTERFACE
PCI Bus supports 32-bit transfers @ 33MHz and legacy ISA bus supporting 16-bit transfers @ 8.3MHz via PISA/PCISA backplane.
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.
DRAM MEMORY
Up to 1GB of DDR SDRAM in one 184-pin DIMM socket.
EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB / 66MB / 33MB per second via 40-pin Box header & 44-pin 2mm Box header
WATCHDOG TIMER
255-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
Intel® 82562ET 10Mbps / 100Mbps, auto-switching
LAN INTERFACE
On board RJ-45 connector with LEDs
DISPLAY CONTROLLER
CHIPSET
Intel® 852GM Extreme Graphics2™ engine with up to 64MB UMA Video RAM.
DISPLAY MEMORY
Up to 64MB of UMA Video RAM.
DISPLAY TYPE
CRT, LVDS and TTL support.
CRT RESOLUTIONS
CRT resolution up to 2048 x 1536
LVDS resolution up to 1600 x 1200
TTL resolution up to 1024 x 768
CRT INTERFACE
On board DB-15 connector
FLASH DISK SUPPORT
Compact Flash Disk Socket
On-board compact flash disk socket supports Type II.
HIGH SPEED MULTI I/O
CHIPSET
Intel® 852GM plus the Intel® ICH4 chips.
SERIAL PORTS
One high speed RS-232C Port COM 1 and one high speed RS-232C / 422 / 485 Port COM 2 (jumper selectable). Supported by 16C550 UART and 16KB FIFO
USB INTERFACES
Six USB 2.0 ports via 10-pin box headers.
SERIAL INFRARED INTERFACE
IrDA TX/RX port via 5-pin header
FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼inch 1.2MB/360KB and 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)
BI-DIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin 2mm header
KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN
AT keyboard port via 5-pin Box header
POWER / ENVIRONMENTAL
POWER REQUIREMENTS
+5V @ 4.45A maximum.
BOARD DIMENSIONS
185mm x 122mm (7.3inch x 4.8inch)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
OPERATING HUMIDITY
0° to 90% (non-condensing).