GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Supports Intel^® Pentium III™ FcPGA and Celeron™ FcPGA CPU’s, up to 1.0_GHz (socket 370) with FSB clock cycles @ 133_MHz / 100_MHz / 66_MHz.

CHIPSET
The VIA^® ProSavage^TM PL 133 combines the performance of the VT8604 “Northbridge” (which provides support for Pentium III^TM / Celeron^TM (FcPGA) processors, a 133_MHz system bus, and PC133 SDRAM memory as well as a Savage4^® graphics core with integrated AGP 4x support) and VT82C686B “Southbridge” (which supports ISA bus, EIDE ATA-100, and USB functionality). Together provide PCI host interface bus support.

HOST BUS INTERFACE
ISA Bus via ISA backplane, 32-bit PC/104+ @ 33_MHz and 16-bit PC/104 @ 8.3_MHz

FLASH BIOS
AWARD^® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.

L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.

DRAM MEMORY
Up to 512_MB of SDRAM in one 168-pin DIMM socket (supports PC133 / PC100 / PC66)

EIDE ULTRA ATA-100 INTERFACES
PCI Enhanced IDE with Ultra DMA 100, supports one port and up to two ATAPI devices. Ultra DMA transfer rates @ 100_MB / 66_MB / 33_MB per second via 40-pin Box header

WATCHDOG TIMER
127-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
CMOS clock with 10_Years of backup via lithium battery, including BIOS setup and BIOS default.

DISPLAY CONTROLLER

CHIPSET
VIA^® S3 Savage4™ 3D and S3 Savage 2000™ 2D engines integrated in VT8604. Supports 4x AGP.

DISPLAY MEMORY
Up to 32_MB of shared SDRAM memory

DISPLAY TYPE
CRT

CRT RESOLUTIONS
Maximum resolution 1024 x 768 @ 32bpp (XGA, SVGA, VGA)
Maximum resolution 1280 x 1024 @ 16bpp (SXGA, XGA, SVGA, VGA)

CRT INTERFACE
On board DB-15 connector

FLASH DISK SUPPORT

DISK-ON-CHIP^® 2000
On board single chip flash disk socket in 32-pin DIP JEDEC, with capacities up to 576_MB

DISK-ON-MODULE^®
Supports one module via EIDE 40-pin Box header with capacities available up to 512_MB per module

HIGH SPEED MULTI I/O

CHIPSET
Integrated in VT82C686B “Super” Southbridge

SERIAL PORTS
One high speed RS-232C port COM 1 via on board DB-9 connector, one internal high speed RS-232C / 422 / 485 (jumper selectable) port COM 2 via 10-pin Box header, and one internal high speed RS-232C / 422 / 485 (jumper selectable) port COM 3 via 10-pin 2_mm header. Supported by 16C550 UART and 16_KB FIFO.

USB INTERFACE
Two USB ports version 1.0 via 10-pin 2_mm headers

SERIAL INFRARED INTERFACE
IrDA TX/RX port via 5-pin Box header

FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼_inch 1.2_MB / 360_KB and 3½_inch 2.88_MB / 1.44_MB / 720_KB floppy disk drives (up to two floppy disk drives)

BIDIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin Box header

KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN and on board AT keyboard port via 5-pin Box header

POWER / ENVIRONMENTAL

POWER REQUIREMENTS
+5_V @ 4.5_A nominal, +/-12_V (Tested with Pentium III™ FcPGA 800_MHz @ 133_MHz FSB with 256_MB SDRAM PC133)

CPU POWER
On board PWM DC-to-DC converter auto-detects CPU core voltage

SYSTEM MONITORING
CPU temperature and voltage

BOARD DIMENSIONS
185_mm x 122_mm (7.28_inch x 4.81_inch)

BOARD WEIGHT
0.26_kg (0.57_lbs)

OPERATING TEMPERATURE
0° to 60°_C (32° to 140°_F)