|
|
|
|
• Standard with 303watt or 433watt PS/2 or 400watt Redundant Power Supply • Front Panel Indicators for Power and HDD Activity • Three 5.25inch Front Accessible Drive Bays • One 3.5inch Front Accessible Drive Bay • Front Panel Controls for Power, Reset • Replaceable, Washable Air Filter • Two 3.5inch Internal Drive Bay • One 120mm Cooling Fan
|
DESCRIPTION:
Shielded rack enclosures like the RME-4500, differ from their non-shielded counterparts in the details of their construction and electrical bonding. A shielded rack enclosure is constructed using materials and finishes that allow all of the enclosure seams to be electrically continuous, including top cover, fan opening, back plates and interfaces. The RME-4500 I/O slot cards, and I/O connectors are better bonded than standard chassis and its back plate is equipped with conductive clips to ensure electrical bonding to the main chassis. System monitoring and full redundancy up to eight separate fans can be monitored. If one of the fans malfunctions an alarm LED will light up and flash and an audible alarm sounds. At two places inside the chassis the temperature can be measured. The temperature limit is configurable between 50 and 70°C. If one of the temperatures exceeds the limit an LED changes color from green to red and an audible alarm sounds. The RME-4500 can be optionally equipped with a hot-plug hot-swap redundant power supply to ensure continuous operation. An extra large shock mounted drive bay can accept as much as three 5¼" drives and three 3½" drives offering enough space for a hot-swap IDE-based RAID subsystem plus an additional CD-ROM drive.
GENERAL SPECIFICATIONS:
DISK DRIVE BAY One 3½inch, three 5¼inch front accessible drive bays and two 3½inch internal drive bays
BACKPLANE 14-slot 64-bit PICMG, 14-slot PICMG or 14-slot ISA backplane (RME-45 51)
MOTHERBOARD ATX form factor (RME-45 11)
POWER SUPPLIES 303watt, 433watt PS/2 form factor with ball bearing fan, 50,000hours MTBF (including fan) or 400watt mini dual redundant with two ball bearing fans 50,000hours MTBF per module (including fans)
CONTROLS VIA FRONT PANEL Power on/off switch, system reset button, alarm reset button behind lockable metal door
INDICATORS ON FRONT PANEL Five LED’s power on, HDD activity, fan failure alarm and temperature alarm
KEYBOARD CONNECTOR Pre-wired 5-pin DIN connector on front panel and rear of unit
SPEAKER 8ohm speaker
COOLING Positive pressure cooling via one 120mm fan with replaceable fan filtered in front of chassis through quick access panel for easy cleaning
ENVIRONMENTAL
OPERATING TEMPERATURE 0~50°C (32~122°F)
RELATIVE HUMIDITY 10~95% @ 40°C (104°F), non-condensing
ALTITUDE 3000m (10,000feet)
VIBRATION (OPERATING) 5~17Hz, 0.1inch double amplitude, 17~500Hz, 1.5G acceleration peak to peak
SHOCK Operating 2.5G @ 15~20ms (35G @ 15~20ms non-operating)
DIMENSIONS 482mm W x 177mm H x 478mm D (19inch x 7inch x 18.8inch)
WEIGHT Net 12.5kg (27.5lbs) without motherboard or backplane, computer board, drives or power supply
APPEARANCE
CONSTRUCTION Heavy-duty steel chassis
COLOR Beige (black optional)
CERTIFICATIONS
SAFETY UL / CSA / TÜV / CE/ FCC
EMI FCC / VDE class B
RME-45 51 BACKPLANE OPTIONS
SGB-1226 14-slot 64-bit PICMG backplane: two 64-bit PICMG slots, twelve 64-bit PCI slots, one ISA slot (see datasheet and/or website for more information)
SGB-7062 14-slot PICMG backplane: two PICMG, seven PCI, six ISA slots (see datasheet and/or website for more information)
SGB-4092 14-slot PICMG backplane: two PICMG, four PCI, nine ISA slots (see datasheet and/or website for more information)
SIB-0142 14-slot ISA backplane (see datasheet and/or website for more information)
RME-45 51 / RME-45 11 POWER SUPPLY OPTIONS
43MV 303watt ATX power supply (PS/2 size); Voltage input: 90~264VAC @ 47~63Hz, active power factor correction; Voltage output (max. load): +3.3VDC @ 28A, +5VDC @ 30A, +12VDC @ 22A, -5VDC @ 1A, -12VDC @ 1A, +5VSB @ 2.2A
43VV 433watt ATX power supply (PS/2 size); Voltage input: 90~264VAC @ 47~63Hz, active power factor correction; Voltage output (max. load): +3.3VDC @ 38A, +5VDC @ 44A, +12VDC @ 33A, -5VDC @ 1A, -12VDC @ 1A, +5VSB @ 2.2A
63RJ-2 400watt mini dual redundant hot-swappable power supply (4U form factor); Voltage input: 90~264VAC @ 47~63Hz, power factor correction; Voltage output (max. load): +3.3VDC @ 24A, +5VDC @ 35A, +12VDC @ 18A, -5VDC @ 0.5A, -12VDC @ 0.8A +5VSB @ 2A
|
|