GENERAL SPECIFICATIONS:
CPU
Slot on backside for flat insallation of Pentium® II or Pentium® III CPU
CHIPSET
Intel® 82443 BX, 82371 EB (PIIX4E)
BIOS
Y2K complaint AWARD® Flash supports NCR SCSI, Green&Soft Off function, LS120 and Multiple boot-up
SECONDARY CACHE
On Pentium® II/III
DATA BUS
32-bit
BUS SPEEDS
PCI and ISA, complies with PICMG standard
DMA CONTROLLERS
8237 x 2
DMA CHANNELS
7
INTERRUPT CONTROLLERS
8259 x 2
INTERRUPT LEVELS
15
PCI ENHANCED IDE WITH ULTRA DMA
Supports two ports and up to four hard drives or enhanced IDE devices. Supports PIO mode ¾ and Bus-Master. Ultra DMA transfer rates of 33MB /sec, multiword DMA mode 2 transfer
WATCHDOG TIMER
Generates a system reset or interrupt when your application loses control over the system. The timer interval is 1, 2, 10, 20, 110, and 220 seconds
REAL-TIME CLOCK
ODIN 12B887A (or compatible) with lithium battery backup for 10Years of data retention. CMOS data backup of BIOS setup and BIOS default
KEYBOARD AND MOUSE CONNECTORS
6-pin mini DIN for PS/2 mouse
6-pin mini DIN for keyboard
5-pin internal header for AT keyboard
HIGH SPEED MULTI I/O
CHIPSET
Winbound W83977TF-AW
SERIAL PORTS
One internal /extrnal high speed RS-232 port COM1 (for DVL version only internal connector), one internal high speed RS-232/485 port COM2 (jumper selectable). Both with 16C550 UART and 16 byte FIFO
USB
Two onboard USB ports (12Mb/s and 1.5Mb/s)
SIR INTERFACE
5-pin IrDA TX/RX header
FLOPPY DISK DRIVE INTERFACE
Up to two floppy drives, 5¼" (360KB or 1.2MB) and 3½" ( 720KB, 1.44MB or 2.88MB). BIOS enabled/disabled
BI - DIRECTIONAL PARALLEL PORT
Supports SPP, EPP, and ECP mode
AGP/PCI 3D GRAPHICS ACCELERATOR
CHIPSET
SIS 6326AGP, 2x AGP supports up to 133MHz
BIOS
Combined with system BIOS
MEMORY
8MB SDRAM onboard
DISPLAY TYPE
CRT
CONNECTORS
15-pin D-type female
10BASE-T100BASE-TX PCI ETHERNET
CHIPSET
Realtek® RTL8139A
TYPE
10BASE-T / 100BASE-TX
CONNECTOR
External RJ-45
MONITORING LEDS
10 BASE-T / 100 BASE-TX indicator, network activity indicator
FLASH DISK DISK-ON-CHIP® 2000
PACKAGE
Single chip flash disk in 32-pin DIP JEDEC
CAPACITY
1-144 MByte
DATA RELIABILITY
ECC/EDC error correction
MEMORY WINDOW
8 KByte
ENVIROMENTAL AND POWER
POWER REQUIREMENTS
+5V (4.75~5.25V) @ 12A (300MHz CPU), ± 12V @ 20mA
CPU POWER
Onboard PWM switching power supply for autodetects CPU core voltage
SYSTEM MONITORING AND ALARM
CPU and system temperature, system voltage and cooling fan RPM
BOARD DIMENSIONS
338mm x 122mm
BOARD WEIGHT
0.45kg(0.99lbs)
OPERATING TEMPERATURE
0 to 55°C