GENERAL SPECIFICATIONS:

• Relay Output
• Number of relays: 8
• Relay type: Single-pole, double-throw (SPDT)
• Output channels
• Relay # 0~3 are Form C (includes normally open and close contacts)
• Relay # 4~7 are Form A (includes normally open only)
• LED indicates each relay's ON/OFF status for monitoring
• • Contact Type: 120VAC @ 0.5A or 24VDC @ 1A
  • Contact resistance: Bifurcated

• Relay ON/OFF time: 8 ms typical

• Coil voltage: +5V @ 33mA for each relay

• Isolated Inputs

• Number of channels: 8

• Photo isolators: PC-814

• Input signal type: AC or DC

• AC: no polarity

• DC: with polarity

• Input voltage range: 0 ~ 24VDC or 24VAC 50 ~ 1,000Hz

• Input Logic Level

• Logic Low: 0~2.4V

• Logic High: 3~24V

• Input filters: RC low pass filter

• Input impedance: 1.2 KΩ

• Isolation voltage: 5,000 V rms channel-to-system

• power/ground

• Response time

• 20 µsec without AC Filter

• 2.2 ms with AC Filter

• Enviromental Specifications

• Operating temperature: 0° ~ 60°C

• Storage temperature: -20° ~ 80°C

• Humidity: 5~90%, non-condensing

• Power requirement

• PCI-7250  +5V: 140mA typical

• PCI-7251  +5V: 125mA typical

• Dimension

• PCI-7250: 162 mm x 107 mm

• PCI-7251: 141 mm x 102 mm