|
|
|
|
• TFT/DST/EL Flat Panel Support
• Supports 4MB of EDO RAM
• Realtek 8019AS; 10Mbps
• Supports 386SX 40MHz
• ALi M1217D Chipset
• Two Serial Ports
|
DESCRIPTION:
The PBC-2111 is a PC/104 core module with an embedded 40MHz ALi® M6711D processor (requires no CPU fan), along with 4MB of embedded SDRAM. The PBC-2111 features on board NE2000 Ethernet capability, IDE interface, two serial ports, and a on board Disk-On-Chip socket. Supplementing this offering is a video interface capable of supporting CRT and flat panel displays along with 16 independent digital inputs and outputs which are completely software selectable.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT
ALi M6117D is an implementation of an Intel® compatible 386SX-40 CPU
CHIPSET
ALi M1217D
BIOS
AMI system BIOS
RAM MEMORY
4MB on board embedded EDO RAM
HOST BUS INTERFACE
16-bit PC/104 @ 8.3MHz
ENHANCED IDE
Supports one port and up to two hard drives or Enhanced IDE devices of PIO mode 4, one 44-pin IDE connector for 2.5” (laptop size) HDD/Flash IDE drive including power pins
WATCHDOG TIMER
256-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL-TIME CLOCK
Included in M6117D with on board lithium battery for 10Years of data retention, CMOS data backup of BIOS setup and BIOS default
NETWORK CONTROLLER
CHIPSET
Realtek 8019AS single chip
TYPE
10BASE-T, NE2000 compatible
LAN INTERFACE
8-pin 2mm header
DISPLAY CONTROLLER
CHIPSET
TP 6508IQ (C&T 65545 optional)
DISPLAY MEMORY
1MB on board
DISPLAY TYPE
CRT and Flat Panel
CRT RESOLUTIONS
1024x768 @ 256 color (XGA)
800x600 @ 16bpp (SVGA)
640x480 @ 32bpp (VGA)
CRT INTERFACE
10-pin 2mm Box header
FLAT PANEL RESOLUTIONS
Maximum resolution 800 x 600 @ 24bpp (SVGA, VGA)
FLAT PANEL INTERFACES
LCD 24-bit via 44-pin Box header
FLASH DISK SUPPORT
FLASH DISK-ON-CHIP 2000
Dual chips Flash Disk in 32-pin DIP JEDEC
HIGH SPEED MULTI I/O
CHIPSET
ALi 5113
SERIAL PORTS
One high speed RS-232C port COM 1, one high speed RS-232C/485 port (jumper selectable) via two 10-pin headers, both with 16C550 compatible UART and 16 byte FIFO
BI-DIRECTIONAL PARALLEL PORT
LPT1 via 26-pin 2mm header. Supports SPP, EPP and ECP modes
FLOPPY DISK DRIVE INTERFACE
Supports two floppy disk drives, 5¼” (360KB or 1.2MB) and 3½” (720KB, 1.44MB). BIOS enabled/disabled
KEYBOARD AND MOUSE CONNECTORS
External PS/2 keyboard/mouse port via two-in-one mini DIN, on board AT keyboard port via 5-pin Box header
DIGITAL I/O
16-bit GPIO, eight independent GPI and eight independent GPO programmable by software
ENVIRONMENTAL AND POWER
POWER REQUIREMENTS
Single voltage +5 VDC @ 800A with 4MB DRAM and 1MB flash disk installed
BOARD DIMENSION
96mm x 90mm (3.8inch x 3.5inch)
BOARD WEIGHT
0.25kg (0.55lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
