|
|
|
|
• On Board Compact Flash Socket Type I/II
• 2.5inch hard driver holder
• LVDS flat panel displays
• PS/2 Keyboard/Mouse
• One PCMCIA Socket
• Two USB 1.1 Ports
• Two Ethernet LAN
• Audio Connectors
• ETX Form Factor
• One Parallel Port
• Four Serial Ports
• CRT Connector
• Digital I/O
|
DESCRIPTION:
The ETX-4101B is an ETX carrier board with ETX form factor. The board contains one EIDE Box header, one PCMCIA socket, 2.5inch hard driver holder, parallel port, two serial ports, two USB ports, one Ethernet LAN, audio connectors, keyboard, mouse, CRT connector.
GENERAL SPECIFICATIONS:
EIDE INTERFACE
PCI Enhanced IDE with Ultra DMA 33 supports one port and up to two ATAPI devices via one 44-pin 2mm Box header
REAL TIME CLOCK
CMOS clock with 10Years of backup via lithium battery, including BIOS setup and BIOS default.
NETWORK
CHIPSET
Realtek 8100BL, 10/100Mbps, auto-switching
LAN INTERFACE
One on board RJ-45 connector
LAN LED
Two LEDs on RJ-45 connector
DISPLAY
DISPLAY TYPES
CRT
CRT INTERFACE
On board DB-15 connector
AUDIO
AUDIO INTERFACES
Line-in, MIC, and speaker out via 8-pin 2mm header
FLASH DISK SUPPORT
DISK-ON-MODULE®
One module via EIDE 44-pin Box header (up to 512MB per module)
PCMCIA
CHIPSET
Ricoh R5C485
PCMCIA INTERFACE
One on board socket PCMCIA port
HIGH SPEED MULTI I/O
CHIPSET
Winbond 83977EF
SERIAL PORTS
Two high speed RS-232C ports. COM 1 via on board DB-9 connector and COM 2 via 10-pin 2mm Box header.
USB INTERFACES
Two on board USB 1.1 ports
BIDIRECTIONAL PARALLEL PORT
LPT1 via 26-pin 2mm Box header
SIR INTERFACE
Infrared (IR) via 5-pin header; IrDA ver. 1.1
KEYBOARD / MOUSE INTERFACES
PS/2 keyboard and PS/2 mouse ports via 6-pin Box header
POWER / ENVIRONMENTAL
POWER INTERFACES
2-pin header for +5V, ground
POWER SWITCH
One power switch (momentary switch)
BOARD DIMENSIONS
145mm x 102mm (5.7inch x 4.0inch)
BOARD WEIGHT
0.14kg (0.31lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
