ETC-4298A

Intel Low Voltage Pentium M / Celeron M ETX CPU...

• Wide Temperature Board
• Embedded Intel® Pentium™ M / Celeron™ M processors
• Support DDRII SODIMM SDRAM up to 1GB via one 200-pin socket
• Support CRT / LCD Displays
• PS/2 Keyboard/Mouse
• Single 10 / 100 base-T Ethernet
• Four USB 2.0 Ports
• One Parallel Port
• Two Ultra DMA 100 Supports Four IDE Devices
• Supports Motion Compensation for MPEG2

DESCRIPTION:

The ETC-4298A is a Wide Temperature Intel® Pentium™ M / Celeron™ M ETX CPU Module with support for DDRII SODIMM SDRAM up to 1GB via one 200-pin socket. The ETC-4298A features a single on-board Intel® 82562EZ 10 / 100 base-T Ethernet, two RS-232 port (COM1, COM2) and four USB 2.0 compliant ports. Supplementing this offering is a video interface capable of supporting CRT / LCD displays.

GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Embedded Intel® Pentium™ M / Celeron™ M processors.

CHIPSET
Intel® 852GM + ICH4 chipset
.

FLASH BIOS
PHOENIX-AWARD® PnP Flash BIOS. BIOS upgrades are available from the MIS web site.

DRAM MEMORY
Supports up to 1GB DDRII 533 / 667MHz SODIMM via one 200-pin socket
.

ENHANCED IDE
Two Ultra DMA 100 support four IDE devices.

WATCHDOG TIMER
255-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Intel® 82562EZ 10 / 100 base-T Ethernet

LAN INTERFACES
Single RJ-45 connectors.

EXPANSION BUS

ETX
ETX1 - PCI Bus, USB, Audio
ETX2 - ISA Bus
ETX3 - CRT, LVDS, COM1, COM2, LPT/FDD, IrDA, KB/MS
ETX4 - IDE1, IDE2, Ethernet, Miscellaneous

DISPLAY CONTROLLER

CHIPSET
Intel® 852GM Extreme Graphics2 Engine with up to 64 MB UMA Video RAM.

DISPLAY TYPES
CRT & LVDS

CRT RESOLUTIONS
Support up to 2084 x 1536.

CRT INTERFACE
On board VGA connector.

LCD RESOLUTIONS
Support Dual Channel 18 / 36 bit LVDS up to 1600 x 1200.

LCD INTERFACE
On board DF-13-40DP-1.25V header.

AUDIO CONTROLLER

CHIPSET
Realtek® ALC655 AC97 Audio Codec supports Mic-In / Line-In / Line-Out.

AUDIO INTERFACES
Onboard 10-pin 2mm box header.

HIGH SPEED MULTI I/O

CHIPSET
Intel® 852GM + ICH4

SERIAL PORTS
Two RS-232 port (COM1, COM2). Supports 16C550 UART and 16KB FIFO.

USB INTERFACES
Four USB 2.0 ports.

FLOPPY DISK DRIVE INTERFACE
One Floppy Disk Drive interace shared with Parallel Port.

BIDIRECTIONAL PARALLEL PORTS
One bidirectional ports support SPP, EPP and ECP modes.

KEYBOARD / MOUSE INTERFACES
External PS/2 keyboard / mouse port.

POWER REQUIREMENT / ENVIRONMENTAL

BOARD DIMENSIONS
114mm x 95mm (4.5inch x 3.7inch)

OPERATING HUMIDITY
5% ~ 95% (non-condensing)

OPERATING TEMPERATURE
ETC-4298A-N-P1100-HT: -40° to 80°C (-40° to 176°F)
ETC-4298A-N-P1100-LT: -25° to 70°C (-13° to 158°F)
ETC-4298A-N-C600-HT: -40° to 80°C (-40° to 176°F)
ETC-4298A-N-C600-LT: -25° to 70°C (-13° to 158°F)

Request Quotation

Select your preferences for this product, then click the "Request for Quotation" button. You can build a list of products and then submit to Modular Industrial Solutions for a price quotation.

Select Product Options
ETC-4298A-N-P1100-HT Intel® ULV Pentim™ M 1.1GHz High Temperature ETX CPU Module with CRT/LCD, Audio and LAN
ETC-4298A-N-P1100-LT Intel® ULV Pentim™ M 1.1GHz Low Temperature ETX CPU Module with CRT/LCD, Audio and LAN
ETC-4298A-N-C600-HT Intel® ULV Celeron™ M 600MHz High Temperature ETX CPU Module with CRT/LCD, Audio and LAN
ETC-4298A-N-C600-LT Intel® ULV Celeron™ M 600MHz Low Temperature ETX CPU Module with CRT/LCD, Audio and LAN
ETX-8371-N ETX Evaluation Board in ATX Form Factor
C4298F Heat Sink

Can't find the exact configuration for your application? No problem! We will be happy to configure the ETC-4298A to almost any desired specification to meet your needs. Please contact your local MIS representative or call MIS direct for more Information.

Tip: Check the box, then click "Request Quote" when you have completed your selections and are ready to send in Your List to receive a price quotation.