ETC-3297

VIA Mark ETX CPU Module with CRT / LCD, Audio &...

• Support VIA® Mark™ processors FSB 533 / 800MHz
• Support DDR DIMM up to 4GB SDRAM
• Support CRT / LCD Displays
• Support 10 / 100 base-T Ethernet
• Four USB 1.1 Ports
• Audio Connectors
• One Parallel Port

DESCRIPTION:

The ETC-3297 is an ETX CPU Module with support for a VIA® Mark™ processor FSB 533 / 800MHz, support for SODIMM up to 512MB SDRAM via one 144-pin sockets. The ETC-3297 features on-board Realtek® 8100CL 10 / 100 base-T Ethernet, and two serial ports. Supplementing this offering is a video interface capable of supporting CRT / LCD displays.

GENERAL SPECIFICATIONS:

PROCESSOR
Supports VIA® Mark™ 533 / 800MHz CPU.

CHIPSET
VIA® Mark™ + VT82686B.

FLASH BIOS
Phoenix-Award® PnP Flash BIOS. BIOS upgrades are available from the MIS web site.

DRAM MEMORY
Supports up to 512MB of SODIMM SDRAM via one 144-pin sockets.

ENHANCED IDE
Two Ultra DMA 66 / 100 IDE supports four IDE drives.

WATCHDOG TIMER
127-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL-TIME CLOCK
Lithium battery backup for 10Years of data retention, CMOS data backup of BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Realtek® 8100CL 10 / 100 base-T Ethernet.

TYPE
Up to 10 / 100 / 1000 Gigabit Ethernet.

LAN INTERFACES
RJ-45 Ethernet connectors.

DISPLAY CONTROLLER

CHIPSET
VIA® Mark Savage4™ Engine up to 32MB UMA Video RAM.

DISPLAY MEMORY
Up to 32MB UMA Video RAM.

DISPLAY TYPES
CRT & LCD display support.

CRT RESOLUTIONS
1920 x 1440.

CRT INTERFACE
DB-15 on board connector.

LCD RESOLUTIONS
18 / 36 bit LVDS up to 1208 x 1024.
18 / 24 / 36 bit TTL up to 1280 x 1024

LCD INTERFACE
LCD1: DF-13 40-pin header
LCD2: DF-13 20-pin header.

HIGH SPEED MULTI I/O

CHIPSETS
VIA® Mark + VT82686B.

SERIAL PORTS
Two high speed RS-232 ports (depending on configuration ordered) 16C550 compatible UART and 16byte FIFO.

FLOPPY DISK DRIVE INTERFACE
FDD supports one floppy disk drives.

BI-DIRECTIONAL PARALLEL PORT
LPT1 via onboard 26-pin Box header; Supports SPP, EPP and ECP modes

USB PORTS
Four USB 2.0 compliant ports.

AUDIO

VT1613 AC97 codec supports Mic-in/Line-in/Line-out.

ENVIRONMENTAL AND POWER

BOARD DIMENSIONS
114mm x 95mm (4.5inch x 3.7inch).

OPERATING Humidity
0% ~ 90% (non-condensing)

OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)

Request Quotation

Select your preferences for this product, then click the "Request for Quotation" button. You can build a list of products and then submit to Modular Industrial Solutions for a price quotation.

Select Product Options
ETC-3297-VN-V800 VIA® Mark™ 800MHz ETX CPU Module

Can't find the exact configuration for your application? No problem! We will be happy to configure the ETC-3297 to almost any desired specification to meet your needs. Please contact your local MIS representative or call MIS direct for more Information.

Tip: Check the box, then click "Request Quote" when you have completed your selections and are ready to send in Your List to receive a price quotation.