|
|
|
|
• Supports Pentium 4™ Processor (mPGA) up to 3.06GHz via Socket 478
• Intel® AGP Extreme Graphics with 64MB of Shared SDRAM
• Supports up to 2GB OF PC2100 DDR Memory
• Compact Flash and Disk-On-Chip™ Socket
• Dual Ethernet 10Mbps / 100Mbps / 1Gbps
• TTL / LVDS Flat Panel Support
• 533/400MHz Front Side Bus
• NTSC/PAL TV Output
• ISA64 High Bus Drive
|
DESCRIPTION:
The SBC-8632 is a PICMG Single Board Computer, capable of supporting Pentium 4 or Celeron processors with the Intel® 845GV chipset. The SBC-8632 features dual Ethernet capability with one Ethernet supporting up to 1Gbps , a video interface utilizing up to 64MB of shared SDRAM, the capability of supporting UXGA resolutions, a 533/400MHz system bus and support DDR PC2100 memory.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT
Supports Pentium 4™ (mPGA) CPUs up to 3.06GHz with FSB clock cycles @ 533MHz and 400MHz.
CHIPSET
Intel® 845GV provides support for Pentium 4™ / Celeron™ (mPGA) processor, at 533MHz / 400MHz system bus, and PC2100 DDR SDRAM memory. Intel® 845GV has two controller hubs which include 82845GV Graphics and Memory Controller Hub (GMCH) and the 82801DB I/O Controller Hub (ICH4). 82845GV controls the Integrated Intel® Extreme Graphics which gives video without the need of a graphics card, and it also controls DDR SDRAM or PC133 SDRAM. 82801DB controls the USB 2.0, Ultra ATA/100, LAN interface and PCI.
HOST BUS INTERFACE
PCI Bus supports 32-bit transfers @ 33MHz and legacy ISA bus supporting 16-bit transfers @ 8.3MHz via PICMG backplane.
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.
DDR MEMORY
Up to 2GB of DDR SDRAM in two 184-pin DIMM sockets (supports PC2100 / PC1600)
EIDE ULTRA ATA-133 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB / 66MB / 33MB per second via two 40-pin Box headers
WATCHDOG TIMER
254-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
Incorporated in chipset with 5Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
SBC-8632-N / SBC-8632-CN / SBC-8632-NG
Intel® 82562ET 10Mbps / 100Mbps, auto-switching
SBC-8632-NG
Intel® 82562ET 10Mbps / 100Mbps, auto-switching and Intel® 82540EM 10Mbps / 100Mbps / 1Gbps auto-switching
LAN INTERFACES
SBC-8632-N / SBC-8632-CN / SBC-8632-NG
External RJ-45 connector via SBC I/O plate
SBC-8632-NG
Two external RJ-45 connectors via SBC I/O plate
DISPLAY CONTROLLER
CHIPSET
Graphics controller integrated in Intel® 845GV chipset via 82845GV GMCH chip with Intel® 4x AGP “Extreme Graphics”.
DISPLAY MEMORY
Up to 64MB of shared SDRAM memory
DISPLAY TYPES
CRT, Flat Panel (optional), TV-Output (optional)
CRT RESOLUTIONS
Maximum resolution 1600 x 1200 @ 32bpp (UXGA, SXGA, XGA, SVGA, VGA)
CRT INTERFACE
On board DB-15 connector
FLAT PANEL RESOLUTIONS
Maximum resolution 1600 x 1200 @ 24bpp (UXGA, SXGA, XGA, SVGA, VGA)
FLAT PANEL INTERFACES (OPTIONAL)
SBC-8632-N and SBC-8632-NG:
18/24-bit TTL via 40-pin Hirose connector on daughterboard
Dual channel 18/24-bit LVDS via 30-pin Hirose connector on daughterboard
The daughter board (DB-C700) connects to the SBC via two 80-pin Hirose connectors
TV-OUTPUT RESOLUTIONS
NTSC and PAL up to 1024 x 768 (XGA)
TV-OUTPUT INTERFACE (OPTIONAL)
SBC-8632-N and SBC-8632-NG:
10-pin Hirose connector on daughterboard
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000
Supports single chip flash disk in a 32-pin DIP JEDEC with capacities up to 576MB
COMPACT FLASH
SBC-8632-N and SBC-8632-NG:
Supports type I & type II compact flash disks with capacities up to 1GB via compact flash socket on rear side of SBC
DISK-ON-MODULE®
Supports up to two modules via two EIDE 40-pin Box header with capacities up to 512MB per module
ISA64 HIGH BUS DRIVE
ISA TTL BUFFERED
64mA of high bus drive TTL buffer supports up to 20-ISA host bus interface cards.
HIGH SPEED MULTI I/O
CHIPSET
Windbond® W83627HF
FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼inch 1.2MB/360KB and 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)
SERIAL PORTS
One internal high speed RS-232C port COM 1 via 10-pin Box header and one internal RS-232C/422/485 (jumper selectable) port COM 2 via 10-pin Box header. Supported by 16C550 UART and 16KB FIFO
USB INTERFACES
Two USB 2.0 ports via 10-pin 2mm header
BIDIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin Box header
KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN, and AT keyboard port via 5-pin Box header
SYSTEM MONITORING / ALARMING
CHIPSET
Windbond® W83627HF
MONITORING
CPU / system temperature, system voltage and cooling fan RPM
POWER / ENVIRONMENTAL
POWER REQUIREMENTS
+5V @ 2.82A nominal, +12V @ 1.98A nominal, -12V @ 0.14A nominal (tested with Pentium 4™ mPGA @ 3.0GHz @ 533MHz FSB, with 1GB DDR PC2100)
BOARD DIMENSIONS
338mm x 122mm (13.31inch x 4.8inch)
BOARD WEIGHT
0.6kg (1.32lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
