|
|
|
|
• Pentium III™ (Tualatin) / Celeron™ Processor (FcPGA2) up to 1.56GHz • Intel® 815E / 82815 Graphics Controller with CRT and LCD Support • Supports Disk-On-Chip™ / Disk-On-Module™ Flash Memory • On-Board Adaptec® Ultra-160 SCSI Controller • Triple Fast Ethernet 10Mbps / 100Mbps • TMDS Flat Panel Interface • ISA64 High Bus Drive
|
DESCRIPTION:
The SBC-8443 is a PICMG Single Board Computer, capable of supporting Pentium III™ (Tualatin) or Celeron™ processors up to 1.56GHz, with the Intel® 815E chipset. The SBC-8443 features triple Ethernet capability, and on-board Ultra-160 SCSI Interface utilizing an Adaptec® AIC-7892 SCSI controller with ISA64 High Bus Drive.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT Supports Pentium III™ (Tualatin) FcPGA2 up to 1.56GHz, Pentium III™ (Coppermine) FcPGA and Celeron FcPGA CPUs up to 1GHz (Socket 370) with FSB clock cycles @ 133MHz / 100MHz / 66MHz.
CHIPSET Intel® 815E provides support for Pentium III™ processor. Intel® 815E has two controller hubs which include 82815 Graphics and Memory Controller Hub (GMCH) and the 82801BA I/O Controller Hub (ICH2). The 82815 controls the graphics controller and PC133/100/66 SDRAM. The 82801BA controls two USB controllers (four ports USB 1.1), ATA/100, LAN interface, PCI, Super I/O.
HOST BUS INTERFACE PCI Bus supports 32-bit transfers @ 33MHz and legacy ISA bus supporting 16-bit transfers @ 8.3MHz via PICMG backplane.
FLASH BIOS AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.
DRAM MEMORY Up to 512MB of SDRAM in two 168-pin DIMM sockets (supports PC133 / PC100 / PC66)
EIDE ULTRA ATA-100 INTERFACES (DUAL) PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB /66MB / 33MB per second via two 40-pin Box headers
WATCHDOG TIMER 128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK Incorporated in chipset with 10Years of CMOS Backup via lithium battery. Backup includes BIOS setup and BIOS default.
SCSI CONTROLLER
CHIPSET SBC-8433-NS and SBC-8433-N3S: Adaptec® AIC-7892
SCSI INTERFACE SBC-8433-NS and SBC-8433-N3S: SCSI ULTRA 160 via 68-pin male SCSI-3 connector
NETWORK CONTROLLER
CHIPSETS Two Intel® 82559 and one 8256ET PHY 10Mbps / 100Mbps, auto-switching
LAN INTERFACES One RJ-45 connector via SBC I/O plate Two additional RJ-45 connectors via DB-K320 daughter board included with SBC-8433-N3 and SBC-8443-N3S
DISPLAY CONTROLLER
CHIPSET Intel® 815E / 82815 2D/3D 4x AGP engines
DISPLAY MEMORY 4MB of on board SDRAM memory
DISPLAY TYPES CRT, Flat Panel (optional)
CRT RESOLUTIONS Maximum resolution 1280 x 1024 @ 24bpp (SXGA, XGA, SVGA, VGA)
CRT INTERFACE On board DB-15 connector
FLAT PANEL RESOLUTIONS Maximum resolution 1280 x 1024 @ 24bpp (SXGA, XGA, SVGA, VGA)
FLAT PANEL INTERFACES (OPTIONAL) SBC-8443-N3 and SBC-8433-N3S: 24-pin DVI interface on DB-K320 TMDS daughter board. DB-K320 can be connected to SBC-8443 via two 20-pin 2mm headers.
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000 On board single chip flash disk socket in a 32-pin DIP JEDEC with capacities up to 576MB
DISK-ON-MODULE® Supports up to two modules via two EIDE 40-pin box headers with capacities available up to 512MB per module
ISA64 HIGH BUS DRIVE
ISA TTL BUFFERED 64mA of high bus drive TTL buffer supports up to 20-ISA host bus interface cards.
HIGH SPEED MULTI I/O
CHIPSET Winbond® W83627HF
SERIAL PORTS One external high speed RS-232C port COM 1 via DB-9 connector and one internal high speed RS-232C / 422 / 485 (jumper selectable) port COM 2 via 10-pin Box header. Supported by 16C550 UART and 16KB FIFO
USB INTERFACES Four USB 1.1 ports via two 10-pin 2mm headers
SERIAL INFRARED INTERFACE (SIR) On board IrDA TX / RX port via 5-pin header
FLOPPY DISK DRIVE INTERFACE FDD via 34-pin Box header; Supports 5¼inch 1.2MB/360KB and 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)
BIDIRECTIONAL PARALLEL PORT Supports SPP, EPP and ECP modes via 26-pin Box header
KEYBOARD / MOUSE INTERFACE External PS/2 keyboard / mouse port via two-in-one mini DIN and AT keyboard port via 5-pin Box header
POWER / ENVIRONMENTAL
POWER REQUIREMENT +5V @ 6.8A nominal, +12V @ 0.08A nominal,12V @ 0.08A nominal (tested with Pentium III™ FcPGA @ 1GHz @ 133MHz FSB with 512MB SDRAM PC133)
CPU POWER On-board PWM DC-to-DC converter auto-detects CPU core voltage.
SYSTEM MONITORING CPU temperature and voltage
BOARD DIMENSIONS 338mm x 122mm (13.31inch x 4.8inch)
BOARD WEIGHT 0.6kg (1.32lbs)
OPERATING TEMPERATURE 0° to 60°C (32° to 140°F)
Additional Photos:
DB-K320 TMDS Flat Panel Daughter Board with 2 Additional Fast Ethernets (Included with SBC-8443-N3 and SCB-8443-N3S) [view larger image]
|
|
|