|
|
|
|
• On Board Compact Flash Socket Type I/II
• 32-bit PC/104+ and 16-bit PC/104
• LVDS flat panel displays
• PS/2 Keyboard/Mouse
• NTSC/PAL TV Output
• Two Ethernet Ports
• Four USB 1.1 Ports
• Audio Connectors
• ETX Form Factor
• One Parallel Port
• CRT Connector
• Digital I/O
|
DESCRIPTION:
The ETX-1331 is an ETX carrier board with ETX form factor. The board contains 32-bit PC/104+, 16-bit PC/104, one EIDE Box header, compact flash socket type I/II, parallel port, four serial ports, four USB ports, two Ethernet LAN, audio connectors, keyboard, mouse, 8-bit digital I/O, CRT connector, LVDS flat panel displays, along with an output for NTSC / PAL compatible television.
GENERAL SPECIFICATIONS:
HOST BUS INTERFACES
32-bit PC/104+ @ 33MHz, 16-bit PC/104 @ 8.3MHz
EIDE INTERFACE
PCI Enhanced IDE with Ultra DMA 33 supports one port and up to two ATAPI devices via one 44-pin 2mm Box header
REAL TIME CLOCK
CMOS clock with 10Years of backup via lithium battery, including BIOS setup and BIOS default.
NETWORK
CHIPSET
Realtek® 8100BL, 10/100Mbps, auto-switching
LAN INTERFACES
Two Ethernets via two 10-pin 2mm headers
LAN LED
Four LEDs via two 4-pin 2mm headers
DISPLAY
DISPLAY TYPES
CRT, Flat Panel, TV-Output
CRT INTERFACE
16-pin 2mm Box headers
FLAT PANEL INTERFACE
LVDS via 30-pin Hirose connector
TV-OUT INTERFACE
6-pin Box header
AUDIO
AUDIO INTERFACES
Line-in, MIC, and speaker out via 10-pin 2mm Box header
FLASH DISK SUPPORT
COMPACT FLASH INTERFACE
On board compact flash socket type I/II, up to 1GB
DISK-ON-MODULE®
One module via EIDE 44-pin Box header (up to 512MB per module)
HIGH SPEED MULTI I/O
CHIPSET
Winbond 83977EF
SERIAL PORTS
Four high speed RS-232C ports: COM 1, COM 2, COM 3 & COM 4 via two 20-pin 2mm headers. COM 2 is RS-232C/422/485 (jumper selectable).
USB INTERFACES
Four USB 1.1 ports via two 10-pin 2mm headers
FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin 2mm Box header
BIDIRECTIONAL PARALLEL PORT
LPT1 via 26-pin 2mm header
SIR INTERFACE
Infrared (IR) via 5-pin header; IrDA ver. 1.1
KEYBOARD / MOUSE INTERFACES
PS/2 keyboard and PS/2 mouse ports via 6-pin Box header
DISCRETE DIGITAL I/O
GPIO INTERFACE
Four independent digital inputs and four independent digital outputs (software programmable) via 20-pin 2mm header
POWER / ENVIRONMENTAL
POWER INTERFACES
Terminal block for +5V, ground, ground, +12V
BOARD DIMENSIONS
114mm x 95mm (4.5inch x 3.7inch)
BOARD WEIGHT
0.11kg (0.24lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
