ETC-3288

ETX Embedded Mini-Board Computer with On-Board...

• On board Transmeta Crusoe TM5800 Processor 800MHz
• Supports up to 512MB of DDR SDRAM via SODIMM Socket
• 10Mbps / 100Mbps Ethernet
• VIA VT82C686B Chipset
• AC ‘97 Audio Controller
• TTL Flat Panel Support
• TV Output NTSC/PAL
• Four USB 1.1 Ports
• Two Serial Ports

GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Transmeta Crusoe TM5800 processor @ 800MHz (fanless operation)

CHIPSET
The Northbridge is integrated into Transmeta Crusoe TM5800 processor, it controls the video and DDR memory. The Southbridge is VIA VT82C686B controls USB 1.1, Ultra ATA/100, ATAPI CD-ROM, LAN interface, audio controller AC ’97, serial interfaces, and keyboard/mouse.

FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS website.

L-2 CACHE
512KB integrated via CPU

DDR MEMORY
Up to 512MB of DDR SODIMM in one 200-pin SODIMM socket (supports PC2100)

EIDE ULTRA DMA-100 INTERFACES
Enhanced IDE with Ultra DMA 100, supports two port and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB per second via ETX carrier board.

WATCHDOG TIMER
127-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
CMOS clock with 10Years of backup via lithium battery, including BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Realtek® 8100BL, 10/100Mbps

LAN INTERFACE
RJ-45 via carrier board

DISPLAY CONTROLLER

CHIPSET
SMI722G8 3D Video Accelerator

DISPLAY MEMORY
8MB video memory

DISPLAY TYPES
Flat Panel, TV-Output

FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)

FLAT PANEL INTERFACES
24-bit TTL via 40-pin Hirose connector
24-bit LVDS via carrier board

TV-OUTPUT INTERFACE
On carrier board

TV-OUTPUT RESOLUTIONS
Maximum resolution 640 x 480 (VGA); Support NTSC, PAL NTSC-EIA.

AUDIO CONTROLLER

CHIPSET
VIA VT82C686B; Audio Codec '97

INTERFACES
Line-in, MIC, speaker out via carrier board

FLASH DISK SUPPORT

DISK-ON-CHIP
Optional single chip 32/64MB

HIGH SPEED MULTI I/O

CHIPSET
VIA VT82C686B

SERIAL PORTS
One high speed RS-232C port COM 1 and one RS-232C/422/485 (jumper selectable) COM 2, both via carrier board.

PARALLEL PORT
LPT1 via carrier board; Supports SPP, EPP and ECP modes

SIR INTERFACE
Infrared (IR) via carrier board; IrDA ver. 1.1

USB INTERFACES
Four USB 1.1 via carrier board

KEYBOARD / MOUSE INTERFACES
One PS/2 keyboard and one PS/2 mouse via carrier board

POWER REQUIREMENT / ENVIRONMENTAL

POWER REQUIREMENT
+5V @ 1.69A max

BOARD DIMENSIONS
95mm x 114mm (3.7inch x 4.5inch)

BOARD WEIGHT
0.09kg (0.19lbs)

OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)

Request Quotation

Select your preferences for this product, then click the "Request for Quotation" button. You can build a list of products and then submit to Modular Industrial Solutions for a price quotation.

Select Product Options
800MHz Embedded Transmeta TM5800 CPU, AWARD Flash BIOS, two EIDE ports (Ultra DMA-100), two serial ports (one RS-232C and one RS-232C/422/485), four USB ports, parallel port, SIR interface, video interface (SMI722G8 3D) CRT XGA /Flat Panel interface, TV Output, audio (VT82C68B/AC97), Ethernet (Realtek RTL8100BL) 10/100Mbps BT
ETX-8371: ETX carrier board with keyboard/mouse, CRT/Flat Panel/TV-Out, audio, four USB ports, one RJ-45 connector, one compact flash slot, two IDE connectors, one FDD connector, four serial ports, one parallel port, 16-bit DIO, four PCI slots, three ISA slots. (ATX form factor)
ETX-4101: ETX carrier board with keyboard/mouse, CRT/Flat Panel/TV-Out, audio, two USB 1.1 connectors, one Ethernet, dual PCMCIA slots, one compact flash, one IDE connector, one FDD connector, two serial ports, one parallel port. (3.5” miniboard form factor)
ETX-4101B: ETX carrier board with keyboard/mouse, CRT, audio, two USB 1.1 connectors, one RJ-45 connector, one PCMCIA slot, one compact flash, one IDE connector, 2.5” HDD holder, two serial ports, one parallel port. (3.5” miniboard form factor)
ETX-1331: ETX carrier board PC/104 and PC/104P with keyboard/mouse, CRT/Flat Panel/TV-Out, audio, four USB 1.1 ports, dual LAN ports, one compact flash, one IDE connector, one FDD connector, four serial ports, one parallel port, 8-bit DIO. (4.5 x 3.7” form factor)

Can't find the exact configuration for your application? No problem! We will be happy to configure the ETC-3288 to almost any desired specification to meet your needs. Please contact your local MIS representative or call MIS direct for more Information.

Tip: Check the box, then click "Request Quote" when you have completed your selections and are ready to send in Your List to receive a price quotation.