|
|
|
|
• Support CRT / LVDS / TV-Out Displays
• PS/2 Keyboard/Mouse
• Six USB 1.1 Ports
• Audio Connectors
• One Parallel Port
• Two Ultra DMA 100
• Four PCI slots
• One PC / 104 Plus slot
|
DESCRIPTION:
The ETP-4120 is an ETX Evaluation Board in ATX form factor. The ETP-4120 features one RJ-45 Ethernet connector with LED, four serial ports, four PCI slots, one PC / 104 Plus slot, and six USB 1.1 compliant ports. Supplementing this offering is a video interface capable of supporting CRT / LVDS / TV-Out displays.
GENERAL SPECIFICATIONS:
ENHANCED IDE
Two Ultra DMA 100 supports four IDE drives.
NETWORK CONTROLLER
LAN INTERFACES
One RJ-45 Ethernet connector with LED.
EXPANSION BUS
PCIe
Four PCI slots.
One PC / 104 slot.
DISPLAY CONTROLLER
DISPLAY TYPES
CRT, LVDS & TV-out display support.
CRT INTERFACE
DB-15 on board connector.
LVDS INTERFACE
DF-13 30-pin header
TV-Out INTERFACE
2.00mm pitch 1 x 6-pin box wafer connector.
HIGH SPEED MULTI I/O
SERIAL PORTS
Three high speed RS-232 ports and one RS-232 / 422 / 484 port 16C550 compatible UART and 16byte FIFO.
FLOPPY DISK DRIVE INTERFACE
FDD supports one floppy disk drive shared with parallel port.
BI-DIRECTIONAL PARALLEL PORT
LPT1 via onboard 26-pin Box header; Supports SPP, EPP and ECP modes
KEYBOARD AND MOUSE CONNECTORS
External PS/2 keyboard/mouse port via 2-in-1 mini DIN, on board AT keyboard port via 5-pin Box header
DIGITAL I / O
Onboard 8 bit Digital I / O.
USB PORTS
Six USB 1.1 compliant ports.
AUDIO
Mic-In / Line-In / Line-out.
ENVIRONMENTAL AND POWER
POWER TYPE
AT Type P9 / P8 12-pin connector.
ATX Type: 20-pin source with 3-pin ATX control
BOARD DIMENSIONS
305mm x 226mm (12inch x 8.9inch).
|
|
