|
|
|
|
SPECIAL
ORDER PRODUCT,
Minimum
Production Order Required
• Supports ZFx86 133MHz
/ 100MHz / 66MHz / 33MHz
• SMI SM712G4AA LynxEM4 Graphic Chipset
• Realtek 8139C; Ethernet 10Mbps / 100Mbps
• 32MB of SDRAM On Board Memory
• Disk-On-Chip® 2000 up to 1GB
• TTL Flat Panel Support
• Two Serial Ports
|
DESCRIPTION:
The PBC-2124 is a PC/104 core module with an embedded ZF Micro Systems® 100MHz ZFx86 processor and 32MB of embedded SDRAM. The PBC-2124 features on-board fast Ethernet (10Mbps / 100Mbps), an on board Disk-On-Chip™ socket Enhanced IDE. Included on this board is a video interface capable of supporting CRT and flat panel displays and a software selectable 16 channel DIO with independent digital inputs and outputs.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT
Embedded (BGA) ZFx86 Failsafe 486™ CPU core @ 133MHz (over-clock mode) / 100MHz (default) / 66MHz / 33MHz (jumper selectable) with 32-Bit 33MHz PCI version 2.1 compliant (Northbridge and Southbridge). FailSafe internal boot ROM allowing execution of multiple instruction sets (DRAM clear, flash erase, executable load and run) providing a permanent and FailSafe mechanism.
BIOS
Phoenix embedded PC BIOS with RS-232C console redirection for headless BIOS access.
DRAM MEMORY
32MB of on board embedded DRAM
HOST BUS INTERFACE
16-bit PC/104 @ 8.3MHz
EIDE ULTRA DMA 66 INTERFACE
PCI Enhanced IDE with Ultra DMA 66: Supports up to two ATAPI devices via one 44-pin Box 2mm header. Ultra DMA 66 transfer rates @ 66MB per second.
WATCHDOG TIMER
256-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
CMOS clock with 10Years of backup via lithium battery, including BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
Realtek 8139C 10/100Mbps
LAN INTERFACE
10-pin 2mm header
DISPLAY CONTROLLER
PBC-2124-V*
CHIPSET
SM® SM 712G4AA LynexEM4+
DISPLAY MEMORY
4MB on die video memory
DISPLAY TYPE
CRT, Flat Panel
CRT RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)
CRT INTERFACE
16-pin 2mm Box header
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)
FLAT PANEL INTERFACES
LCD 24-bit TTL via 34-pin Box header
PBC-2124-VBN**
CHIPSET
C&T® 69000
DISPLAY MEMORY
2MB on die video memory
DISPLAY TYPE
CRT, Flat Panel
CRT RESOLUTIONS
Maximum resolution 1280 x 1024 @ 8bpp (SXGA, XGA, SVGA, VGA)
CRT INTERFACE
16-pin 2mm Box header
FLAT PANEL RESOLUTIONS
Maximum resolution 800 x 600 @ 18bpp (SVGA, VGA)
FLAT PANEL INTERFACES
LCD 18-bit TTL via 34-pin Box header
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000
Single chip flash disk in 32-pin DIP JEDEC, up to 576MB
DISK-ON-MODULE®
Supports one module via EIDE 44-pin 2mm Box header, up to 512MB per module
HIGH SPEED MULTI I/O
SERIAL PORTS
Two RS-232C ports COM 1, and COM 2 via two 10-pin 2mm Box headers. COM 2 (jumper selectable) RS-232C / 422 / 485. Supported by 16C550 UART and 16KB FIFO
BIDIRECTIONAL PARALLEL PORT
LPT1 via 26-pin 2mm header. Supports SPP, EPP and ECP modes
FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin 2mm header; Supports 5¼inch 1.2MB / 360KB and 3½inch 2.88MB / 1.44MB / 720KB floppy disk drives (up to two floppy disk drives).
KEYBOARD / MOUSE INTERFACE
PS/2 keyboard/mouse via 10-pin 2mm header
DISCRETE DIGITAL I/O
GPIO INTERFACE
Eight independent digital inputs and eight independent digital outputs software programmable
POWER REQUIREMENT / ENVIRONMENTAL
POWER REQUIREMENT
133MHz (over-clock mode) +5V @ 1.1A nominal
100MHz (default) +5V @ 0.90A nominal
66MHz +5V @ 0.80A nominal
33MHz +5V @ 0.80A nominal
Tested with embedded 32MB SDRAM and 8MB of flash disk
BOARD DIMENSIONS
96mm x 90mm (3.8inch x 3.5inch)
BOARD WEIGHT
0.10kg (0.22lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
