|
|
|
|
• Supports Embedded Low Power Pentium III Processor up to 800MHz
• Intel® 4x AGP Extreme Graphics with 64MB of Shared SDRAM
• Supports up to 512MB of PC100/PC133 SDRAM
• Audio Interface with AC ‘97 Audio Controller
• TMDS, TTL, and LVDS Flat Panel Support
• On board Compact Flash Card Type I/II
• On board Mini PCI Slot Type III
• Four USB Ports (Version 1.1)
• 100/133MHz Front Side Bus
• Ethernet 10Mbps / 100Mbps
• Intel® 815E Chipset
• Four Serial Ports
|
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT
Intel® Low Voltage Pentium III 800MHz processor with FSB 100/133 MHz EBGA package.
CHIPSET
Intel® 815E provides support for Pentium III™ processor. Intel® 815E has two controller hubs which include 82815 Graphics and Memory Controller Hub (GMCH) and the 82801BA I/O Controller Hub (ICH2). The 82815 controls the graphics controller and PC100/133 SDRAM. The 82801BA controls two USB controllers (four ports USB 1.1), ATA/100, LAN interface, AC ’97 6 Channel Audio, PCI, Super I/O.
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE
Integrated via CPU; Pentium III has options of 256KB or 512KB
DRAM MEMORY
Up to 512MB of SDRAM in one 144-pin SODIMM socket (supports PC133 / PC100)
HOST BUS INTERFACE
PCI bus supports 32-bit transfers @ 33MHz via one mini PCI slot type III.
EIDE ULTRA DMA-33 INTERFACE
PCI Enhanced IDE with Ultra DMA 33, supports one port and up to two ATAPI devices. Ultra DMA transfer rates @ 33MB per second via 44-pin 2mm Box header.
WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
CMOS clock with 10Years of backup via lithium battery, including BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
Intel® 82562ET, 10/100 Mbps
INTERFACE
On board RJ-45
DISPLAY CONTROLLER
EBC-6257-N:*
CHIPSET
Intel® 82815 integrated 2D/3D Video Accelerator, supporting 2x AGP and 128-bit engine
DISPLAY MEMORY
Up to 32MB of shared SDRAM memory
DISPLAY TYPES
CRT and Flat Panel
CRT RESOLUTIONS
Maximum resolution 1280 x 1024 @ 24bpp (SXGA, XGA, SVGA, VGA)
CRT INTERFACE
On board DB-15 connector
FLAT PANEL INTERFACE
TMDS via 20-pin Hirose connector to DVI output; Transmits up to 165MHz
EBC-6257-VBN:**
CHIPSET
SMI LynxEM+ SMI 722, 64-bit GUI 3D engine
DISPLAY MEMORY
8MB SDRAM on die
DISPLAY TYPES
CRT, Flat Panel
CRT RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)
CRT INTERFACE
On board DB-15 connector
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)
FLAT PANEL INTERFACES
TMDS via 20-pin Hirose connector to DVI output; Transmits up to 165MHz
TTL via 40-pin Hirose connector
LVDS via 30-pin Hirose connector
AUDIO
CHIPSET
Intel® ICH2 AC ‘97 2.0 compliant, Multi-stream Direct Sound and Direct Sound 3D acceleration.
AUDIO INTERFACES
Line-in, MIC, speaker out via 10-pin 2mm Box header and CD audio in via 4-pin header
FLASH DISK SUPPORT
DISK-ON-MODULE®
One module via EIDE 44-pin 2mm Box header with capacities available up to 512MB
SSD INTERFACE
On board compact flash socket type I/II; Supports up to 1GB
HIGH SPEED MULTI I/O
CHIPSET
Winbond 83627HF
SERIAL PORTS
Three high speed RS-232C ports. COM 1, COM 3 & COM 4, one RS-232C/422/485 (jumper selectable) COM 2 via 30-pin 2mm header. Supports by 16C550 UART
USB INTERFACES
Four USB ports version 1.1; Two USB ports integrated on board, and two USB ports via 10-pin 2mm headers.
FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin 2mm Box header; Supports 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)
BI-DIRECTIONAL PARALLEL PORT INTERFACE
LPT1 via 26-pin 2mm header; Supports SPP, EPP and ECP modes
SIR INTERFACE
Infrared (IR) via 5-pin header; IrDA 1.1
KEYBOARD / MOUSE INTERFACES
One PS/2 keyboard/mouse port on board via two-in-one mini DIN
POWER REQUIREMENT / ENVIRONMENTAL
POWER REQUIREMENT
+5VDC @ 2.78A nominal; Tested Low Voltage embedded Intel® Pentium III 800MHz and 256MB SDRAM.
POWER INTERFACE
On board 4-pin (hard drive type) power connector.
SYSTEM MONITORING
CPU & system temperature, system voltage, and cooling fan RPM.
BOARD DIMENSIONS
145mm x 102mm (5.7inch x 4inch)
BOARD WEIGHT
0.175Kg (0.39lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
