GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Supports Intel^® Pentium III™ FcPGA and Celeron™ FcPGA CPU’s, up to 1.0_GHz (Socket 370) with FSB clock cycles @ 133_MHz / 100_MHz / 66_MHz.

CHIPSET
The VIA^® ProSavage^TM PL 133 combines the performance of the VT8604 “Northbridge” (which provides support for Pentium III^TM / Celeron^TM (FcPGA) processors, a 133_MHz system bus, and PC133 SDRAM memory as well as, a Savage4^® graphics core with integrated AGP 4x support) and VT82C686B “Southbridge” (which supports ISA bus, EIDE ATA-100, and USB functionality). Together provide PCI host interface bus support.

HOST BUS INTERFACE
PCI Bus supports 32-bit transfers @ 33_MHz and legacy ISA bus supporting 16-bit transfers @ 8.3_MHz via PISA/PCISA backplane.

FLASH BIOS
AWARD^® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.

L-2 CACHE
Integrated via CPU. Contact your local representative or MIS for available cache sizes when specifying CPU.

DRAM MEMORY
Up to 512_MB of SDRAM in one 168-pin DIMM socket (supports PC133 / PC100 / PC66).

EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100_MB / 66_MB / 33_MB per second via 40-pin Box header & 44-pin 2_mm Box header

WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
Incorporated in chipset with 10_Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Intel^® 82559 10_Mbps / 100_Mbps, auto-switching 

LAN INTERFACE
On board RJ-45 connector with LEDs

DISPLAY CONTROLLER

CHIPSET
VIA^® S3 Savage4™ 3D and S3 Savage 2000™ 2D engines integrated in VT8604. Supports 4x AGP

DISPLAY MEMORY
Up to 32_MB of shared SDRAM memory

DISPLAY TYPE
CRT, Flat Panel

CRT RESOLUTIONS
Maximum resolution 1600 x 1200 @ 32bpp (UXGA, XGA, SVGA, VGA)
Maximum resolution 1920 x 1440 @ 16bpp

CRT INTERFACE
On board DB-15 connector

FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)

FLAT PANEL INTERFACES ON DAUGTER BOARDS
DB-C200 TTL via 75-pin header
DB-C300 TMDS via 20-pin Hirose Connector
DB-C400 LVDS via 20-pin Hirose Connector

FLASH DISK SUPPORT

DISK-ON-CHIP^® 2000
On-board single chip flash disk socket in (32-pin DIP JEDEC), with capacities up to 576_MB

DISK-ON-MODULE^®
Supports one module EIDE via 40-pin Box header with capacities available up to 512_MB per module

HIGH SPEED MULTI I/O

CHIPSET
Integrated in VT82C686B “Super” Southbridge

SERIAL PORTS
One external DB-9 connector high speed RS-232C Port COM 1 and one internal 10-pin Box header high speed RS-232C / 422 / 485 Port COM 2 (jumper selectable). Supported by 16C550 UART and 16_KB FIFO

USB INTERFACES
Two USB 1.1 ports via one 10-pin 2_mm headers

SERIAL INFRARED INTERFACE
IrDA TX/RX port via 5-pin header

FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin Box header; Supports 5¼_inch 1.2_MB/360_KB and 3½_inch 2.88_MB/1.44_MB/720_KB floppy disk drives (up to two floppy disk drives)

BI-DIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin 2_mm header

KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN
AT keyboard port via 5-pin Box header

POWER / ENVIRONMENTAL

POWER REQUIREMENTS
+5_V @ 4.7_A nominal, +/-12_V @ 0.13_A (Tested with Pentium III™ FcPGA @ 800_MHz @ 133_MHz FSB, with 256_MB SDRAM PC133)

SYSTEM MONITORING
CPU temperature and voltage

BOARD DIMENSIONS
185_mm x 122_mm (7.3_inch x 4.8_inch)

BOARD WEIGHT
0.28_kg (0.62_lbs)

OPERATING TEMPERATURE
0° to 60°_C (32° to 140°_F)