|
|
|
|
• Dual Pentium III™ Tualatin Processors (FcPGA2) up to 1.56GHz • ATI RAGE™ XL Graphics Controller with CRT and LCD Support • Supports Disk-On-Chip™ / Disk-On-Module™ Flash Memory • PCI, ISA and PCI-X Host Interface Card Support • Supports up to 4GB of SDRAM • Dual Ethernet 10/100Mbps • ISA64 High Bus Drive
|
DESCRIPTION:
The SBC-9543 is a 64-bit PICMG Single Board Computer, capable of supporting dual Pentium III™ or Celeron™ processors up to 1.56GHz , which utilizes with the Server Works® ServerSet III LE™ chipset. The SBC-9543 features dual Ethernet capability at 10Mbps / 100Mbps, a video interface utilizing up to 8MB of shared SDRAM with the capability of supporting SXGA resolutions, and supports for PCI, PCI-X and ISA host interface cards.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT Supports dual Pentium III™ (Tualatin) FcPGA2 up to 1.56GHz, Pentium III™ (Coppermine) FcPGA and Celeron FcPGA CPUs up to 1GHz with FSB clock cycles @ 133MHz / 100MHz / 66MHz
CHIPSET Server Works® ServerSet III LE™ provides support for Pentium III™ / Celeron™ (FcPGA2) processor, a 133MHz system bus, and PC133 SDRAM memory.
HOST BUS INTERFACES PCI-X bus supports 64-bit transfers @ 66MHz / 33 , PCI bus supports 32-bit transfers @ 33MHz, and legacy ISA bus supporting 16-bit transfers @ 8.3MHz via PICMG backplane.
FLASH BIOS AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE Integrated via CPU, contact your local representative or MIS for available cache sizes when specifying CPU.
DRAM MEMORY Up to 4GB of SDRAM (ECC & non ECC) in four 168-pin DIMM sockets (supports PC133 / PC100 / PC66)
EIDE ULTRA ATA-133 INTERFACES (DUAL) PCI Enhanced IDE with Ultra DMA 133, supports two ports and up to four ATAPI devices. One port supports Ultra DMA transfer rates @ 133MB / 100MB / 66MB per second (HighPoint HPT-371 IDE controller), with the second port supports transfers @ 33MB per second both via two 40-pin Box headers
WATCHDOG TIMER 254-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK Incorporated in chipset with 10Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET Two Intel® 82559 10Mbps / 100Mbps, auto-switching
LAN INTERFACES Two external RJ-45 connectors via SBC I/O plate
DISPLAY CONTROLLER
CHIPSET ATI® RAGE™ graphics controller
DISPLAY MEMORY Up to 8MB of SDRAM memory
DISPLAY TYPES CRT, Flat Panel (optional)
CRT RESOLUTIONS Maximum resolution 1280 x 1024 @ 32bpp (SXGA, XGA, SVGA, VGA)
CRT INTERFACE On board DB-15 connector
FLAT PANEL RESOLUTIONS Maximum resolution 1280 x 1024 @ 32bpp (SXGA, XGA, SVGA, VGA)
FLAT PANEL INTERFACES (OPTIONAL) TMDS via DB-C301 DVI port on daughterboard The daughter connects to the SBC via 14-pin 2mm header
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000 Supports single chip flash disk in 32-pin DIP JEDEC socket with capacities up to 576MB
DISK-ON-MODULE® Supports up to two modules via two EIDE 40-pin Box headers with capacities up to 512MB per module
ISA64 HIGH BUS DRIVE
ISA TTL BUFFERED 64mA of high bus drive TTL buffer supports up to 20-ISA host bus interface cards
HIGH SPEED MULTI I/O
CHIPSET SMSC® FDC 37B787
SERIAL PORTS One internal high speed RS-232C port COM 1 via 10-pin Box header and one internal RS-232C/422/485 (jumper selectable) port COM 2 via 10-pin Box header. Supported by 16C550 UART and 16KB FIFO
USB INTERFACES Two USB 1.0 ports via 10-pin 2mm header
FLOPPY DISK DRIVE INTERFACE FDD via 34-pin Box header; Supports 5¼inch 1.2MB/360KB and 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)
BIDIRECTIONAL PARALLEL PORT Supports SPP, EPP and ECP modes via 26-pin Box header
KEYBOARD / MOUSE INTERFACE External PS/2 keyboard / mouse port via two-in-one mini DIN, and AT keyboard port via 5-pin Box header
SYSTEM MONITORING / ALARMING
CHIPSET Windbond® W83782D
MONITORING CPU / system temperature, system voltage and cooling fan RPM
POWER / ENVIRONMENTAL
POWER REQUIREMENTS +5V @ 10.03A nominal, +12V @ 0.44A nominal, -12V @ 0.08A nominal (tested with two Pentium III™ FcPGA2 (Tualatin) @ 1.26GHz @ 133FSB, with 2GB PC133 registered SDRAM)
BOARD DIMENSIONS 338mm x 122mm (13.31inch x 4.8inch)
BOARD WEIGHT 0.6kg (1.32lbs)
OPERATING TEMPERATURE 0° to 55°C (32° to 131°F)
|
|