GENERAL SPECIFICATIONS:

CPU
INTEL® / AMD/ Cyrix/ UMC 486SX/ DX/ DX2/ DX4-25/33/50/66/100MHz, 5V or 3.3V/3.45V auto switch

CACHE MEMORY
8KB or 16KB (DX4) on-chip, up to 1024KB external cache

BUS INTERFACE
32-bit PCI and 16-bit ISA (PICMG 2.0 Complaint)

RAM MEMORY
1MB to 128MB uses four 72-pin SIMM sockets for up to 4 banks of DRAM

WATCHDOG TIMER
2-stage timers invoke NMI and/ or RESET system if application software cannot control the system

FLASH/ RAM/ ROM/ DISK
12V Flash devices INTEL®/ AMD 28F010, 28F020 (Onboard programmable)
MXIC 28F1000, 28F4000, (Onboard programmable)
5V Flash devices ATMEL 29C010, 29C020, 29C040 (DOS commands)
SST 29EE010, 28F040 (DOS commands)
SRAM devices SONY 581000, 584000 (DOS commands)
EPROM devices 27C010, 27C020, 27C040, 27C080, (External programmer)

VL-BUS IDE CONTROLLER
32-bit host data transfer
Mode-3 transfer capabilities (>10MB/ sec.)

PRINTER PORT ADDRESS AND IRQ SELECT
3BCH, 378H, 278H; IRQ7, or IRQ5

SERIAL PORT 1 ADDRESS AND IRQ SELECT
3F8H, 3E8H, 2E8H; IRQ4 or IRQ15

SERIAL PORT 2 ADDRESS AND IRQ SELECT
2F8H, 3E8H, 2E8H, IRQ3, or IRQ11

DMA CHANNELS
7

INTERRUPT CHANNELS
15

BUS SPEED
8MHz (selectable)

STORAGE TEMPERATURE
-4 to 248°F (-20 to 120°C)

OPERATING TEMPERATURE
32 to 140°F (0 to 60°C)

MAX. POWER REQUIREMENT
+5V @ 3A, +12V @ 30mA, -12V @ 20mA

BOARD TYPE
Single-side SMT, 6-layer P.C.B.

BOARD SIZE
338mm by 122mm

BOARD WEIGHT
0.5Kg

Request Quotation

Select your preferences for this product, then click the "Request for Quotation" button. You can build a list of products and then submit to Modular Industrial Solutions for a price quotation.

Select Product Options
Full-Size PICMG Single Board Computer Capable of 32-bit PCI, 16-bit ISA Bus Interface, Supporting four 72-pin SIMM sockets for DRAM, with up to 1024KB external cache memory, Capable of supporting Intel 486 at 100MHz complete with 1MB of L2 cache

Can't find the exact configuration for your application? No problem! We will be happy to configure the PIA-6420 to almost any desired specification to meet your needs. Please contact your local MIS representative or call MIS direct for more Information.

Tip: Check the box, then click "Request Quote" when you have completed your selections and are ready to send in Your List to receive a price quotation.