|
|
|
|
• Pentium III™ (Tualatin) / Celeron™ Processor (FcPGA2) up to 1.56GHz
• Audio Interface with AC '97 Audio Controller
• Low-Profile SODIMM Socket up to 512MB
• Supports NTSC and PAL TV Outputs
• Dual Fast Ethernet 10Mbps / 100Mbps
• DVI, S-Video and RF Interface
• TMDS Flat Panel Support
• Compact Flash™ Socket
• Discrete Digital I/O
• One Parallel Port
• Two Serial Ports
• Four USB Ports
|
DESCRIPTION:
The SBC-5447 is a PCI Bus Single Board Computer, capable of supporting Pentium III™ or Celeron™ processors up to 1.56GHz, which utilizes the Intel® 815EB chipset. The SBC-5447 features dual fast Ethernet (10Mbps / 100Mbps), video capabilities supporting a variety of displays (CRT / TMDS flat panel / TV output), audio functionality and support for Compact Flash disks.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT
Supports Pentium III™ Tualatin FcPGA2 up to 1.56GHz, Pentium III™ Coppermine FcPGA, and Celeron FcPGA CPUs up to 1GHz (Socket 370) with FSB clock cycles @ 133MHz /100MHz / 66MHz.
CHIPSET
Intel® 815E provides support for Pentium III™ / Celeron™ processor. Intel® 815E has two controller hubs which include 82815 Graphics and Memory Controller Hub (GMCH) and the 82801BA I/O Controller Hub (ICH2). The 82815 controls the graphics controller and PC100/133 SDRAM. The 82801BA controls two USB controllers (four ports USB 1.1), ATA/100, LAN interface, AC ’97 6 channel audio, PCI, super I/O.
HOST BUS INTERFACE
PCI bus supports 32-bit transfers @ 33MHz, via PCI backplane.
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE
Integrated via CPU; Pentium III has options of 256KB or 512KB
DRAM MEMORY
Up to 512MB of SDRAM in one 144-pin SODIMM socket (Supports PC133 / PC100 / PC66).
EIDE ULTRA ATA-100 INTERFACE
PCI Enhanced IDE with Ultra-DMA 100, supports one port and up to two ATAPI devices via 40-pin Box header. Ultra-DMA transfer rates @ 100MB / 66MB / 33MB per second.
WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery, backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
Intel® 82559 and ICH2 8256ET PHY @ 10Mbps / 100Mbps, auto-switching
LAN INTERFACES
Two on board RJ-45 connectors
DISPLAY / TV CONTROLLER
CHIPSET
Intel® 815E / 8215 with graphics memory controller hub and dynamic video memory
Intel® 82815 integrated 2D/3D Video Accelerator, supporting 4x AGP.
DISPLAY MEMORY
Up to 32MB of shared SDRAM memory
DISPLAY TYPES
CRT, Flat Panel, TV-Output
CRT RESOLUTIONS
Maximum resolution 1280 x 600 @ 24bpp (SXGA, XGA, SVGA, VGA)
CRT INTERFACE
On board DB-15 connector
TV-OUTPUT RESOLUTIONS
Maximum resolution 800 x 600 (SVGA, VGA)
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)
TV-OUTPUT / FLAT PANEL INTERFACES
On board TMDS via 42-pin mini Box header
DB-G330 TMDS / TV on Daughter Board via 24-pin DVI interface
DB-G330 TMDS / TV on Daughter Board NTSC, PAL via S-Video and RF-Out connectors.
AUDIO CONTROLLER
CHIPSET
AC '97 digital audio controller, with SoundBlaster ProTM and direct sound ready
AUDIO INTERFACES
Line-in, MIC, speaker out via 10-pin 2mm header and CD audio in via 4-pin Box header
FLASH DISK SUPPORT
COMPACT FLASH
Supports type I & type II compact flash disks with capacities up to 1GB via CF socket on rear side of SBC 5176-N2 and SBC-5176-NR2).
DISK-ON-MODULE ®
One module via EIDE 40-pin Box header with capacities available up to 512MB
HIGH SPEED MULTI I/O
CHIPSET
ITE® IT8712F-A
SERIAL PORTS
One high speed RS-232C port COM 1 and one RS-232C / 422 / 485 (jumper selectable) COM 2 via two 10-pin 2mm headers. Supported by 16C550 UART and 16KB FIFO
USB INTERFACES
Four USB 1.1 ports via two 10-pin 2mm headers
SERIAL INFRARED INTERFACE (SIR)
IrDA TX/RX port via 6-pin header
FLOPPY DISK DRIVE INTERFACE
Supports 5¼inch (1.2MB / 360KB) and 3½inch (2.88MB / 1.44MB / 720KB) floppy disk drives via 34-pin 2 mm header (up to two floppy disk drives)
BI-DIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin 2mm header
KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN, internal AT keyboard port via 5-pin Box header.
DISCRETE DIGITAL I/O
GPIO INTERFACE
Four independent digital inputs and four independent digital outputs software programmable
POWER ENVIRONMENTAL
POWER REQUIREMENTS
+5VDC @ 6.8A nominal, +12VDC @ 0.08A nominal, -12VDC: (Tested with Pentium III™ FcPGA @ 1GHz @ 133MHz FSB, with 512MB SDRAM (PC133).
+5VDC @ 4.7A nominal, +12VDC @ 0.15A nominal, -12VDC: (Tested with Pentium III™ FcPGA @ 800MHz @ 133MHz FSB, with 256MB SDRAM (PC133).
CPU POWER
On board PWM DC-to-DC converter auto-detects CPU core voltage.
SYSTEM MONITORING
CPU temperature and voltage
BOARD DIMENSIONS
185mm x 122mm (7.3inch x 4.8inch)
BOARD WEIGHT
0.28kg (0.62lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
