|
|
|
|
This
Module is End Of Life due to parts availability issues.
It can be updated with new version parts with a Minimum Order
of 1000 pieces with little or no NRE, as few as 300 pieces
with
moderate NRE costs. It can be produced without
the DOC
socket or the USB functions in its current design with no NRE
and a MOQ of only 300 units if that functionality meets your need.
• Supports ZFx86 Processor (BGA) up to 133MHz
• 32MB of SDRAM Embedded On Board
• Dual Ethernet 10Mbps / 100Mbps
• Two USB Ports (Version 1.1)
• Intel® 845GV/PE Chipset
• Disk-On-Chip® 2000
• Two Serial Ports
|
DESCRIPTION:
The PBC-3124 is a PC/104+ core module with an embedded ZF Micro Systems® 100MHz ZFx86 processor and 32MB of embedded SDRAM. The PBC-3124 features dual on board fast Ethernet (10Mbps / 100Mbps), an on board Disk-On Chip™ Socket, Enhanced IDE and two USB ports. Supplementing this offering is a discrete digital I/O interface consisting of 16 independent digital inputs and outputs which are completely software selectable.
GENERAL SPECIFICATIONS:
PROCESSOR SUPPORT
Embedded (BGA) ZFx86 FailSafe 486™ CPU core @ 133MHz (over-clock mode) / 100MHz (default) / 66MHz / 33MHz (jumper selectable) with 32-bit 33MHz PCI version 2.1 compliant (Northbridge and Southbridge). FailSafe internal boot ROM allowing execution of multiple instruction sets (DRAM clear, flash erase, executable load and run) providing a permanent and FailSafe mechanism.
BIOS
Phoenix embedded PC BIOS with RS-232C console redirection for headless BIOS access.
DRAM MEMORY
32MB of on board embedded DRAM
HOST BUS INTERFACE
32-bit PC/104+ @ 33MHz and 16-bit PC/104 @ 8.3MHz
EIDE ATA-66 INTERFACE
PCI EIDE with Ultra DMA-66; Supports up to two ATAPI devices via one 44-pin 2mm Box header. Ultra DMA-66 transfer rates @ 66MB per second.
WATCHDOG TIMER
256-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL-TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
Two Intel® 82559ER 10Mbps/ 100Mbps, auto-switching
LAN INTERFACES
Two 10-pin 2mm headers
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000
Single chip flash disk in 32-pin DIP JEDEC, up to 576MB
DISK-ON-MODULE®
Supports one module via EIDE 44-pin 2mm Box header, up to 512MB per module
OS SUPPORT
Microsoft WindowsTM (9X, NT, CE) DOS, Linux, WindRiver VxWorksTM and RTOS.
HIGH SPEED MULTI I/O
SERIAL PORTS
Two internal RS-232C ports COM 1, and COM 2 via two 10-pin Box headers, COM 2 (jumper selectable) RS-232C / 422 / 485; Supported by 16C550 UART and 16KB FIFO
USB INTERFACES
Two USB 1.1 ports via one 10-pin 2mm header
FLOPPY DISK DRIVE INTERFACE
Supports 5¼inch 1.2MB / 360KB and 3½inch 2.88MB / 1.44MB / 720KB floppy disk drives (up to two floppy disk drives)
BIDIRECTIONAL PARALLEL PORT
Parallel port via 26-pin 2mm Box header. Supports SPP, EPP and ECP modes
KEYBOARD / MOUSE INTERFACE
Internal AT keyboard and PS/2 mouse port via 10-pin 2mm header
DISCRETE DIGITAL I/O
GPIO INTERFACE
Eight independent digital inputs and eight independent digital outputs software programmable
POWER REQUIREMENTS / ENVIRONMENTAL
POWER REQUIREMENTS
133MHz (over-clock mode) +5VDC @ 0.95A nominal
100MHz (default) +5VDC @ 0.75A nominal
66MHz +5VDC @ 0.70A nominal
33MHz +5VDC @ 0.64A nominal
Tested with embedded 32MB SDRAM and 8MB of flash disk
BOARD DIMENSIONS
90mm x 96mm (3.6inch x 3.8inch)
BOARD WEIGHT
0.10Kg (0.22lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
|
|
