PROCESSOR SUPPORT
Embedded Intel® Pentium MMX™ Tillamook (324 mBGA) @ 266MHz (requires no fan for operation)
CHIPSET
The Intel® 430TX chipset is optimized for the Intel® Pentium MMX processor to maximize performance for media rich applications. The 430BX is comprised of an “82439TX North Bridge” (which provides support for the Pentium MMX processor, 512KB L2 cache and up to 256MB of SDRAM memory) and “82371AB South Bridge” (which supports ISA bus, EIDE ATA-33, and USB functionality). Together provide PCI host interface bus support.
HOST BUS INTERFACE
ISA bus supports 16-bit transfers @ 8.3MHz via ISA backplane
FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.
L-2 CACHE
512KB Pipeline Burst SDRAM
DRAM MEMORY
On-board 64MB memory and up to 256MB of SDRAM in one 144-pin SODIMM socket (supports PC66)
EIDE INTERFACE (DUAL)
PCI Enhanced IDE with DMA 33, supports up to two ATAPI devices. Ultra DMA transfer rates @ 33MB per second via 44-pin 2mm header
WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.
REAL TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery. Backup includes BIOS setup and BIOS default.
NETWORK CONTROLLER
CHIPSET
SBC-1235-N3
Three Realtek® RTL8139C 10Mbps / 100Mbps, auto-switching
LAN INTERFACES
SBC-1235-N3
Two external RJ-45 connector on SBC I/O plate and internal 10-pin header on board
DISPLAY CONTROLLER
CHIPSET
SMI® LynxEM+ SM712G4
DISPLAY MEMORY
64bit GUI 2D engine with 4MB SDRAM on die
DISPLAY TYPES
CRT, Flat Panel, TV-Output (optional)
CRT RESOLUTIONS
Maximum resolution 800 x 600 @ 24bpp (SVGA, VGA)
Maximum resolution 1024 x 768 @ 16bpp (XGA, SVGA, VGA)
CRT INTERFACE
On board DB-15 connector
FLAT PANEL RESOLUTIONS
Maximum resolution 1024 x 768 @ 24bpp (XGA, SVGA, VGA)
FLAT PANEL INTERFACES
24-bit TTL via 40-pin Hirose connector
Secondary 24-bit TTL via 40-pin Hirose connector (Optional)
TV-OUTPUT INTERFACE (OPTIONAL)
5-pin Box header out to RCA jack on daughter board. Support NTSC, PAL NTSC-EIA (Japan)
AUDIO CONTROLLER (OPTIONAL)
CHIPSET
ESS® ES1989S SoundBlaster ProTM compliant with AC97TM 2.0 compliant interface includes multi-stream direct sound and direct sound 3D acceleration.
AUDIO INTERFACES (OPTIONAL)
Line-in, MIC, speaker out via 10-pin 2mm header and CD audio via 4-pin mini Box header
FLASH DISK SUPPORT
DISK-ON-CHIP® 2000
On board single chip flash disk socket in 32-pin DIP JEDEC, with capacities up to 576MB
DISK-ON-MODULE®
Supports one module via EIDE 40-pin Box header and one module via EIDE 44-pin box header (two total) up to 512MB per module
HIGH SPEED MULTI I/O
CHIPSET
Winbond® W83977EF-AW
SERIAL PORTS
One high speed RS-232C / 422 / 485 (jumper selectable) port COM 2 via on board DB-9 connector, and one internal high speed RS-232C port COM 1 via 10-pin 2mm header. Supported by 16C550 UART and 16KB FIFO.
USB INTERFACE
Two USB 1.0 ports via 10-pin headers
SERIAL INFRARED INTERFACE
IrDA TX/RX port and front panel connector via 14-pin 2mm header
FLOPPY DISK DRIVE INTERFACE
Supports 5¼inch 1.2MB / 360KB and 3½inch 2.88MB / 1.44MB / 720KB floppy disk drives 34-pin 2mm header
BIDIRECTIONAL PARALLEL PORT
Supports SPP, EPP and ECP modes via 26-pin 2mm header
KEYBOARD / MOUSE INTERFACE
External PS/2 keyboard / mouse port via two-in-one mini DIN, and on board AT keyboard port via 5-pin Box header
POWER / ENVIRONMENTAL
POWER REQUIREMENTS
+5V @ 2.4A nominal, +/-12V @ 70A (Tested with embedded 266MHz Pentium MMX™ Tillamook with 64MB SDRAM)
CPU POWER
On board PWM DC-to-DC converter auto-detects CPU core voltage.
SYSTEM MONITORING
CPU temperature and voltage
BOARD DIMENSIONS
185mm x 122mm (7.28inch x 4.81inch)
BOARD WEIGHT
0.40kg (0.88lbs)
OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)
