LBC-9433

5.25” Embedded Mini Board Computer Capable of...

  • Pentium III / Celeron Processors (FcPGA) up to 1.0GHz via Socket 370
  • On-Board PCI Host Interface Expansion Slot
  • Audio Interface with AC97 Audio Controller
  • Available with LVDS Flat Panel Support
  • On-Board Disk-On-Chip Socket
  • C&T 69000 Graphics Controller
  • PC/104 and PC/104+ Interface
  • Two Bidirectional Parallel Ports
  • Fast Ethernet 10Mbps / 100Mbps
  • Discrete Digital I/O
  • Four Serial Ports

DESCRIPTION:

The LBC-9433 is a 5.25inch (form factor) embedded board computer capable of supporting Pentium III or Celeron processors up to 1.0GHz, which utilizes the VIA ProSavage PL 133 chipset. The LBC-9433 offers expansion capability for PC/104 and PC/104+ modules along with an on-board PCI slot. Supplementing this offering is an on-board fast Ethernet, four serial ports, two bidirectional parallel ports, a Disk-On Chip socket, audio interface, support for flat panel displays along with 16 independent digital inputs and outputs which are completely software selectable.

GENERAL SPECIFICATIONS:

PROCESSOR SUPPORT
Supports Intel® Pentium III™ FcPGA and Celeron™ FcPGA CPU’s, up to 1.0GHz (socket 370) with FSB clock cycles @ 133MHz / 100MHz / 66MHz.

CHIPSET
VIA® ProSavage™ PL 133 (VT8605 Northbridge and VT82C686B “Super” Southbridge), integrates VIA® Apollo Pro™ 133A, S3 Savage4™3D and S3 Savage 2000™ 2D engines and supports 133MHz FSB, and ATA 100.

FLASH BIOS
AWARD® version 6.0 has built-in advanced CMOS setup for system parameters, peripheral management, PCI-to-PCI bridge support and PCI steering. Supports flash devices for BIOS via EIDE interface or Ethernet. BIOS upgrades are available from the MIS web site.

L-2 CACHE
Integrated via CPU

DRAM MEMORY
Up to 512MB of SDRAM in one 168-pin DIMM socket (supports PC133 / PC100 / PC66)

HOST BUS INTERFACE
32-bit PCI @ 33MHz, 32-bit PC/104+ @ 33MHz, 16-bit PC/104 @ 8.3MHz.

EIDE ULTRA ATA-100 INTERFACES (DUAL)
PCI Enhanced IDE with Ultra DMA 100, supports two ports and up to four ATAPI devices. Ultra DMA transfer rates @ 100MB / 66MB / 33MB per second via 40-pin Box header & 44-pin 2mm Box header

WATCHDOG TIMER
128-Level timer (hardware configurable) could be set to automatically detect software anomalies and reset the processor by a predetermined time constant, enabling the system to recover from transient failures.

REAL TIME CLOCK
Incorporated in chipset with 10Years of CMOS backup via lithium battery, backup includes BIOS setup and BIOS default.

NETWORK CONTROLLER

CHIPSET
Intel® 82559 10Mbps/100Mbps, auto-switching

LAN INTERFACE
10-pin 2mm header

DISPLAY CONTROLLER

LBC-9433-VN
CHIPSET
C&T 69000™ HiQVideo accelerator with 2MB SDRAM on die

DISPLAY TYPES
CRT, Flat Panel

CRT RESOLUTIONS
Maximum resolution 1280 x 1024 @ 8bpp (SXGA, XGA, SVGA, VGA)

CRT INTERFACE
CRT via 16-pin 2mm header

FLAT PANEL RESOLUTIONS
Maximum resolution 1280 x 1024 @ 8bpp (SXGA, XGA, SVGA, VGA)

FLAT PANEL INTERFACES
LCD 36-bit TTL via 50-pin Box header

AUDIO CONTROLLER

CHIPSET
ESS Solo-1 ES-19385 3D Sound

AUDIO INTERFACES
AUXA, AUXB, Mic, speaker via 10-pin 2mm header and CDROM audio via 4-pin 2mm header

FLASH DISK SUPPORT

DISK-ON-CHIP® 2000
Single chip flash disk in 32-pin DIP JEDEC, up to 576MB

DISK-ON-MODULE®
Up to two modules via EIDE 40-pin and 44-pin box header (up to 512MB per module)

HIGH SPEED MULTI I/O

CHIPSET
Integrated in VT82C686B “Super” Southbridge

SERIAL PORTS
Three high speed RS-232C ports COM 1, 3 & 4 via four 10-pin 2mm headers, one RS-422/485 (jumper selectable) COM 2 via 4-pin 2mm header. Supported by 16C550 UART and 16KB FIFO

USB INTERFACES
Four USB 1.1 ports via two 10-pin 2mm headers

FLOPPY DISK DRIVE INTERFACE
FDD via 34-pin 2mm header; Supports 5¼inch 1.2MB/360KB and 3½inch 2.88MB/1.44MB/720KB floppy disk drives (up to two floppy disk drives)

BI-DIRECTIONAL PARALLEL PORTS
Two ports LPT 1 & LPT 2 via two 26-pin 2mm headers; Supports SPP, EPP and ECP modes

KEYBOARD / MOUSE INTERFACES
Keyboard/Mouse port via 10-pin 2mm header

DISCRETE DIGITAL I/O

GPIO INTERFACE
Eight independent digital inputs and eight independent digital outputs (software programmable)

POWER / ENVIRONMENTAL

POWER REQUIREMENT
+5V @ 4.8A nominal, +/-12V (tested with Pentium III™ FcPGA 866MHz @ 133MHz FSB with 128MB SDRAM PC133)

CPU POWER
On board PWM DC-to-DC converter auto-detects CPU core voltage.

SYSTEM MONITORING
CPU & system temperature, system voltage, and cooling fan RPM

BOARD DIMENSIONS
203mm x 148mm (8inch x 5.75inch)

BOARD WEIGHT
0.3kg (0.66lbs)

OPERATING TEMPERATURE
0° to 60°C (32° to 140°F)

Request Quotation

Select your preferences for this product, then click the "Request for Quotation" button. You can build a list of products and then submit to Modular Industrial Solutions for a price quotation.

Select Product Options
Socket 370, VIA ProSavage PL 133 chipset, PCI expansion slot, PC/104+ interface, Award BIOS, Disk-On-Chip socket, two EIDE ports (ATA-100), three serial ports, four USB ports, floppy drive interface, two parallel ports, Discrete I/O, CRT SXGA Port (C&T 69000 chipset), Flat Panel interface, audio (ES-19385 3D), Ethernet (Intel 82559) 10/100BT

Can't find the exact configuration for your application? No problem! We will be happy to configure the LBC-9433 to almost any desired specification to meet your needs. Please contact your local MIS representative or call MIS direct for more Information.

Tip: Check the box, then click "Request Quote" when you have completed your selections and are ready to send in Your List to receive a price quotation.